Specifications include, but are not limited to: A. General: Apply paint according to the manufacturer's written instructions. Use applicators and techniques best suited for the substrate and type of material being applied. B. General: Apply high-performance coatings according to the manufacturer's written instructions. 1. Use applicators and techniques best suited for the material being applied. 2. Do not apply high-performance coatings over dirt, rust, scale, grease, moisture, scuffed surfaces, or conditions detrimental to forming a durable coating film. 3. Coating surface treatments and finishes are indicated in the coating system descriptions. 4. Provide finish coats compatible with the primers used. 5. The term "exposed surfaces" includes areas visible when permanent or built-in fixtures, convector covers, grilles, covers for finned-tube radiation, and similar components are in place. Extend coatings in these areas, as required, to maintain system integrity and provide desired protection. C. Application Procedures: Apply coatings by brush, roller, spray, or other applicators according to the manufacturer's written instructions. 1. The number of coats and film thickness required is the same regardless of application method. 2. Completed Work: Match approved Samples for color, texture, and coverage. Remove, refinish, or recoat work that does not comply with specified requirements.
