The Work generally consists of a 1.5-inch pavement overlay located on Olive Ave between Winton Way and the city limits, including approximately 50 lineal feet of conform overlay paving on each intersecting street (unless intersection street has a valley gutter, then conform will stop at valley gutter). Work includes approximately 185,650 square feet of existing surfaced roadway or approximately 5,267 linear centerline feet of roadway, including side street conforms measured to the centerline of Olive Avenue. All roads included in the project are to be paved “current” to Caltrans standard specifications. The Work is described in more detail in the following paragraphs and shall be performed by the Contractor pursuant to current Caltrans standard specifications. All materials and construction methods shall conform to Caltrans Standard Specifications and all applicable material and performance standards therein referenced for hot mix asphalt and other bid items for the intended use and application. Material delivery shall conform to the recommended delivery standards and quality control regarding temperature of materials. The Contractor shall furnish all labor, materials, equipment, tools, incidentals, permits, services, and construction required to complete the Work, which includes: • mobilizing all required resources to complete the Work; • providing temporary traffic control; • providing erosion, sedimentation, and pollution control; • removing existing pavement by wedge grind; • removing existing pavement markers; • removing existing traffic striping and pavement markings by grinding; • disposing and/or recycling of all removed and excess materials; • handling and disposing of any and all hazardous materials; • repairing and filling existing pavement cracks, potholes, and boils; • leveling low/depressed areas of existing pavement; • replacing damaged traffic signal detector loops and lead-in cables; • raising existing utility covers to finish grade; • cleaning loose sand, dirt, debris, and other contaminants from existing pavement; • applying asphalt binder tack coat and sealant; • installing geosynthetic pavement fabric; • placing and compacting 1.5” Type A HMA pavement overlay with 1/2" max. aggregate size; and • replacing thermoplastic traffic striping and pavement markings, and pavement markers.