Argonne National Laboratory is seeking to source:
1 Each Sample single crystal, Pt3Fe, orientation (111), dia. 6,00 mm x thickness/length 4,00 mm, as cut
1 Each Single Crystal single crystal, Pt3Mn, orientation (111), dia. 6,00 mm x thickness/length 4,00 mm, as cut
2 Each Sample Outside diameter -0,00mm/+0,03mm
2 Each Sample Thickness +/-0,1mm
2 Each Sample bottom side plan parallel to top side top and bottom surfaces must be parallel, top and side surfaces should make 90 degrees +/-0,1 deg.
2 Each Sample one side polishing with roughness < 0.01 micron and orientation accuracy < 0.1 deg.
Please see attached solicitation package - on the ANL-70 form:
1. Please remember to sign page 1.
2. Please remember to complete points A-F on page 2.
Please be sure ALL components are completed. NO SOLICITATION WILL BE CONSIDERED WITHOUT THESE COMPLETED. If any components are missing, your solicitation will be discarded.
All forms and signed solicitation have a requested completion date of 4/16/25 at 11:30pm CST. If there are any questions please feel free to reach out to awegrzyn@anl.gov.
