Specifications include, but are not limited to: Case 321F Model, Bobcat L95 T4 V1, or Equivalent Approximate operating weight - 13,000 Lbs Must include a backup camera Engine 4 Cylinder Diesel - Bio Diesel Compatible Minimum 70 HP Net - Min 225 Ft/Lbs Torque Net Liquid Cooled -34F Oil Cooler - Hyd. Cooler - Trans Cooler Air Filter - Dry Type Oil, Fuel, Hyd. Filters - Spin On Cold Weather Starting Aid Block Heater 110 Volt Transmission Hydrostat - Hi/Lo with creep Differential - Minimum of limited slip with full lock option Outboard Planetaries - Wet Disc Service Brakes Mechanical or Hyd. Parking Brake Electrical 12 Volt - Minimum 100 Amp Act. with biggest batteries available. Hyd. System Open Center - Pressure/Flow compensating - Minimum 3300psi relief pressure High Flow - 30 gal/min minimum Standard Flow - 20 gal/min minimum Single Level loader control with F/N/R, High/Low travel mode switch, float switch, and auxiliary control switch Auxiliary Hyd. Flow - min 20 gal/min - 3300psi relief Adjustable Loader Controls - smooth - medium - aggressive Loader Linkage Z bar linkage with heavy duty skid steer coupler that has hyd. controlled locking pins Height at hang pin fully raised - Approximate Min. 130" Auxiliary hyd. couplers and electric connector for attachments Connect under pressure couplers.
