Specifications include, but are not limited to: (a) Work includes but is not limited to: a. Patch exiting surfaces that require paint, including filling of gouges, cracks, dents, drywall blemishes, and of holes. Match existing wall and ceiling finish textures. Patch is to extend at least one (1) inch below where base was removed from wall (maximum of three (3) inches from subfloor). b. Painting of interior surfaces to include gypsum board walls and ceilings, wood window mullions, and re-varnishing of windows and stairway handrails. Paint is to extend at least one (1) inch below where base was removed from wall (maximum of three (3) inches from subfloor). (b) Products: a. Apartments: Sherwin Williams Pro-Mar 200 Eggshell interior latex enamel tinted Berkshire White or Diamond Vogel DE-1531 Eggshell latex enamel tinted Berkshire White for ceilings and walls. Apply one (1) coat over the same color paint, and two (2) coats over different colors for complete coverage. Refer to Drawings for locations. b. Corridors/Stairways: Sherwin Williams Pro-Mar 200 Semi-gloss interior latex enamel tinted Berkshire White or Diamond Vogel DE-1531 Semi-gloss latex enamel tinted Berkshire White for ceilings, metal door frames and walls. Same coverage conditions apply as in 2.1(b)a. Note that there are Accent Walls that receive accent colors. Refer to Drawings for locations. c. Window Mullions: Sherwin Williams Exterior latex semi-gloss white. Apply one (1) coat Sherwin Williams Pro-Block Exterior oil primer. Same coverage conditions apply as in 2.1(b)a. d. Dura-bond 90 for ceiling and wall repairs. e. Sheetrock Lightweight Drywall Compound for ceiling and wall repairs. f. Exterior acrylic latex caulk, 15 years or better. g. Sherwin Williams Pro-Block Primer Sealer. h. Apply two (2) coats of MinWax Marine Spar satin sheen varnish on windows and stairway handrails. Take care to make sure that windows still operate normally. (c) Surface Inspection: a. Examine surfaces scheduled to be painted for conditions that will adversely affect execution, performance, or quality of Work and which cannot be corrected by normal cleaning, sanding, or filling. b. Do not proceed with surface preparation or coating application until conditions are suitable. Application of finish to surface constitutes acceptance of that surface.
