Specifications include, but are not limited to: 1DUMP BOX SPECIFICATIONS15' elliptical steel dump body with 50” integral sides, 52"- 54" end and 52"-54" head: 15 to 17 yard capacity, partial length fenders, stainless steel rear corner bolsters bottom rear bolster and tailgate linkages. Hoist shall be NTEAClass 110 trunnion mounted, chrome or double nitrited, telescopic 32 toncylinder hoist operated by central hydraulic system, and shall be doubleacting. Accepted cylinders shall be a Mailhot CS140-5.5-3DA or a MarathonM63138. Greaseable rear hinge. Box shall be mounted on truck chassis toallow box to be fully raised and so spreader will not hit rear tires and spinner will not drag on the ground. Box shall have foldable steps accessible from steps on fuel tank, incorporated on left front corner of dump body. Two stepson inside left front corner of box. Grab bars installed at steps. Hooks weldedon tailgate to store tailgate chains when not in use. Body safety struts, positive lock style (two total - one on each side). Dump body corner post enclosures, bolted or pinned at bottom of corner post. Made out of No. 304or No. 201 stainless steel.2Floor - constructed out of 3/16" AR400 or HARDOX 450 high tensile steel.Western style formed long sills with no cross members.3Sides & Ends - 3/16" AR400 or HARDOX 450 high tensile steel.4Heavy duty tailgate; air trip operated; 52"-56" high horizontal braced tailgate;3/16" AR400 or HARDOX 450 high tensile steel.
