Specifications include, but are not limited to: 5 MATERIAL OPTIONS ridgid materials: Required: PA11, PA12, PP. Preferred: CF of GF filled PA11 or PA12. flexible materials: Required: TPU of Shore A durometer measuring 90 or lower. Preferred: Skin-safe TPU option.; 6 BUILD ENVELOPE Minimum 450 cu.in. Smallest axis 5"+. At least one axis 10"+ required.; 7 PRINT SPEED Capable of 0.375"/hr (~9.5mm/hr) build speed; 1 2 OPERATING ENVIRONMENT REQUIREMENTS Can fully operate within space with temp ranges between 60 and 85 F, with RH up to 60% Maximum weight = 350 pounds/unit. Printer can fully operate within area with 4' x 7' space, maximum. Auxiliary equipment (depowdering and other) excluded. Capable of remote monitoring through integrated on-board camera, web interface, push notifications, etc. Power: 120V preferred. 240V allowable. Laser system is self-contained and poses no safety risk for bystanders. Safety interlocks for laser system. Powder/dust is managed by system and poses no safety risk for bystanders. System is capable of running in a classroom style environment without creating excessive mess or health hazards. Must operate below 85 db noise level (preferred under 70 db). System contains features to mitigate moisture ingress for long term storage periods. Wired ethernet (RJ45) and WiFi (2.4Ghz and 5Ghz)
