Specifications include, but are not limited to: 1. Install accessories in location as indicated on the Drawings. If not shown on Drawings, as directed by the Architect. 2. Contractor shall verify all quantities as stated in the Specification with the requirements in the Drawings. 3. Units shall be plumb, straight, securely mounted and flush to wall. Provide all blocking required for attachment of toilet accessories. a. Install in accord with approved Shop Drawings and manufacturer's recommendations for each type of substrate encountered. b. All fastening devices must be of sufficient number, type to rigidly hold all accessories in position when subject to normal use. 4. For items where location and mounting heights of accessories for disability use are not shown, request item location on Shop Drawings. 5. All keyed units shall be keyed alike, deliver two keys per unit to the Owner.
