Magnetic Particle Inspection Machine; Magnaflux # AD-2045 or equal, configured in accordance with the attached requirements, set-up, calibrated, and tested prior to acceptance.; Magnaflux GE-54 inspection enclosure, or equal, sized to accommodate a Magnaflux # AD-2045. Enclosure must include an LED UV lamp mount, white light, and vent fan, all operable from table controls. Enclosure must meet Rolls Royce and ASTM certification standards.; Centrifuge tube and stand for 14A particles; Double braided contact pad with V block; 5-gallon container of 14AM Prepared Oil Bath 1. Maximum 12-inch coil 460V/60Hz 2. The total size of the table with enclosure must not exceed 90 inches by 65 inches. 3. Mag shot time adjustable from .5 to 2 seconds. 4. Selectable single or double mag shot. 5. Standard and extended Demag cycle. 6. Generate 250+ shots per hour at maximum unit output. 7. 14v secondary voltage output to minimize electrical exposure to operators. 8. Digital amperage output and previewed before mag shot. 9. Push bar for initiating mag shot. 10. Onsite support within 5 working days.
