***THIS IS A COMBINED SOURCES SOUGHT NOTICE AND NOTICE OF INTENT TO SOLE SOURCE***
BACKGROUND
The Center for Nanoscale Science and Technology (CNST) at the National Institute for Standards and Technology (NIST) seeks an annual maintenance service contract covering routine preventive maintenance (PM) as well as emergency services, repair, and calibration for one ASML PAS 5500/275D stepper lithography system. This system is located in the NIST CNST NanoFab in Gaithersburg, MD.
NIST is seeking information from sources that may be capable of providing a solution that will achieve the objectives described above, in addition to the following essential requirements. If no alternate sources are identified, the Government intends to issue a Sole Source Award to ASML US LLC (2625 W Geronimo PL STE 200 Chandler, Arizona 85224-4935) under the authority of FAR 13.106-1(b).
1. GENERAL REQUIREMENTS
- The vendor shall provide factory trained personnel to maintain, calibrate, repair and replace parts as needed on an ASML PAS 5500/275D stepper lithography system.
- The vendor shall have at least two qualified engineers on staff at all times available for service response.
- Engineers shall be fully trained through ASML in areas which include maintenance, repair, and calibration operations.
- Engineers shall have at least three years of experience servicing ASML PAS 5500/275D stepper lithography systems.
- Engineers shall have access to any special tooling required when performing service and repair to system.
2. INSTRUMENT COVERAGE
- The instrument to be covered under this service agreement is an ASML PAS 5500/275D stepper lithography system, serial number 3740.
- The service contract shall cover all integrated system components of the instrument.
- The service contract shall cover the control and data preparation workstation.
- The service contract shall include all software updates and patches to maintain system using the latest and most recent software versions.
- Coverage shall include all parts and services listed below.
3. SCHEDULED SERVICE
The vendor shall provide qualified service personnel to perform quarterly preventative maintenance (PM) visits to NIST to ensure the equipment is operating at peak performance.
Preventative maintenance shall include at a minimum:
- Calibration of illumination subsystem
- Functional testing of the reticle and wafer handling subsystems
- Any parts found to be unsatisfactory shall be repaired or replaced
4. UNSCHEDULED SERVICE
The vendor shall provide qualified service personnel onsite within one business day of an emergency service call during normal business hours at NIST.
- Business hours are defined as 8:00 am to 5:00 pm, Monday through Friday excluding federal holidays for the duration of this contract.
- Any parts found to be unsatisfactory shall be repaired or replaced.
- As part of any unscheduled service, the vendor may need to escalate the issue within the organization in order to resolve the problem. The vendor shall provide a detailed escalation plan which it will use in order to resolve stepper issues.
5. INSTRUMENT CONFIGURATION/ RE-CONFIGURATION SERVICE
The vendor shall provide qualified service personnel onsite within one business day or less after receiving a request to reconfigure the wafer handling system in order to accommodate substrates which differ in size from the current configuration.
- Business hours are defined as 8:00 am to 5:00 pm, Monday through Friday excluding federal holidays for the duration of this contract.
- The system will require a reconfiguration back to the original wafer handling size once the lot of substrates have been exposed. The vendor shall be responsible for performing this task within one business day or less once the request has been made.
HOW TO RESPOND TO THIS NOTICE
In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response: Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed in this notice as soon as possible, and preferably before the closing date and time of this notice. Please note that to be considered for award under any official solicitation, the entity must be registered and “active” in SAM at the time of solicitation response.
- Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company’s Unique Entity ID (UEI).
- Identify the equipment that your company sells that can meet the objectives addressed in the BACKGROUND section of this notice. For each product recommended to meet the Government’s requirement, provide the following:
- Manufacturer name
- Model number
- Technical specifications
- If your company is not the manufacturer, provide information on your company’s status as an authorized reseller of the product(s)
- Describe performance capabilities of the product(s) your company recommends to meet the Government’s requirements. Additionally, if there are other features or functions that you believe would assist NIST in meeting its objectives described above, please discuss in your response.
- Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization.
- Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications in the BACKGROUND section you cannot meet and state why. Please offer suggestions for how the market research notice and draft minimum specifications could be made more competitive.
- State whether the proposed equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured.
- Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details, including timeline.
- For the NAICS code listed in this notice:
-
- Indicate whether your company is (a) a small business or (b) other than small business. See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information.
-
- If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement.
- Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance.
- Describe standard terms and conditions of sale offered by your company for the recommended equipment such as: delivery time after your company accepts the order; FOB shipping terms; manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services. Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available.
- State whether your company offers facility renovation services related to installation of the recommended equipment at its delivery destination, if required per the NIST-identified minimum specifications, and provide description of said services. Indicate if your company performs the facility renovation services or typically subcontracts the work to another company. Indicate if your company would be interested in inspecting the intended installation site during the market research phase.
- State published price, discount, or rebate arrangements for recommended equipment and/or provide link to access company’s published prices for equipment and services.
- If the recommended equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able to place orders, identify the contract number(s) and other relevant information.
- Identify any customers in the public or private sectors to which you provided the recommended or similar equipment. Include customer(s) information: company name, phone number, point of contact, email address.
- Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement.
- State if you require NIST to provide additional information to improve your understanding of the government’s requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment.
QUESTIONS REGARDING THIS NOTICE
Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice. Questions should be submitted so that they are received 5 days prior to the response date. If the Contracting Officer determines that providing a written amendment to this notice to document question(s) received would benefit other potential respondents, the questions would be anonymized, and a written response to such question(s) would be provided via an amendment to this notice.
IMPORTANT NOTES
This notice is for market research purposes and should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract. There is no solicitation available at this time.
This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response.
NIST reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate.
Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability.
Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.
After a review of the responses received, a synopsis and solicitation may be published on GSA’s eBuy or SAM.gov. However, responses to this notice will not be considered an adequate response to any such solicitation(s).
The responses shall not exceed 5 pages including all attachments, charts, etc.
Thank you for taking the time to submit a response to this request!
