Tires – Visually check condition Lights – Check directional signaling devices and emergency light systems for proper operation Seat belt – Check operation of seat belts Windshield Wipers and Washers – Check condition of wiper arms and blades. Check aim and flow of washer spray. Fill washer reservoir with washer solvent Fluid Levels – Check and replenish fluid levels in transmission, differential, steering sector or power steering pump, and master cylinder. Inspect all units for leakage and clogging Battery – Check condition of heat-shield, hold-down clamps and cable ends, top off electrolyte level, and clean top and terminals as necessary Heater-Defroster-Air Conditioner System and Wiper Controls – Check switches, valves, and ducting doors for proper operation Exhaust System – Visually inspect complete exhaust system including catalytic converter and heat-shielding. Check for broken, damaged, missing, or poorly positioned parts. Inspect for open seams, holes, or any condition which could allow exhaust fumes to enter the vehicle Steering and Suspension Components – Conduct a “look and “shake” inspection Frame/Sub-Frame and Cross Member – Visually check for “drive-over” and/or vehicular damage and fatiguing Drive Shaft U-Joints / CV Joints – Conduct a “look” and “shake” inspection for seal leakage and joint failure
