Specifications include, but are not limited to: QUANTITY: 1) 1,000 booklets with 25 sticker pages per book, for a total of 25,000 sticker pages. Underrun may not exceed 0.5%. No overrun allowed. CONSTRUCTION: 1) Booklets are 7-1/2" wide x 3” high; will consist of twenty-five (25) interior leaves sandwiched between front and back cover leaves; and will be bound at the left side edge by two heavy duty staples. There shall be no binding tape of any type around the binding edge. 2) Front and back cover leaves will be flat sheets of 100 lb. tag, size 7-1/2" wide x 3” high. Front & back covers must both have a stub perforation. The front cover will be printed 1/1 in black. Each booklet’s front cover will be printed and numbered to indicate the range of serial numbers contained in that booklet. The back cover will not be printed. 3) Interior leaves shall be made entirely of white 60 lb. opaque vellum text paper, size 7-1/2" wide x 3” high, and will have two functionally distinct areas, as follows: A) On the left (refer to image of front side view on next page), a 4-1/2” x 3” inspector’s worksheet area. This will include the unprinted portion that is bound with staples. There will be no stub perforation, since the inspector’s worksheet will remain always bound in the booklet. B) On the right, a 3” x 3” inspection sticker, perforated for tear-off from the inspector’s worksheet. This sticker shall be made of the same paper as the inspector’s worksheet, and will be made into a sticker through the application of an adhesive transfer tape covering exactly the 3” x 3” area of the sticker face (on the back side of the leaf). See images of the previous year’s sticker on next page.
