I. GENERAL GUIDELINES: • A computer printout of the Coordinate Geometry (COGO) survey file shall be included that confirms that the mathematical survey expressions and the Northing and Easting coordinates at each change of bearing which are used to define the parcel on the plan and in the metes and bounds description forms a closed polygon and verifies that the areas stated are correct. • Digital surveys are to be compatible with AutoCAD 2015 or newer versions and Windows 7 or newer versions. • Digital surveys are to be prepared in the AutoCAD Model Space environment. • Digital surveys are to be plotted/printed as a Layout in the AutoCAD Paper Space environment. • All surveys shall include a Title Block, Graphic Scale, and a North Arrow in the Paper Space environment. • Digital surveys must be one (1) .dwg file and one (1) .dxf file. • Digital .dwg file must show all text and be an exact replica of the survey print. • In survey digital drawings, one (1) AutoCAD drawing unit shall equal one foot (1') and AutoCAD Decimal Units shall be used. Scale shall be determined by clarity of information or as specified by the Park System. • Survey digital drawing must be in the New Jersey State Plane Coordinate System (NJSPCS) Map Datum, NAD1983, and referenced on the survey. • The Digital Model Space drawing view must be unrotated so that the NJSPCS North points orthographically up (vertical) in the screen. The New Jersey State Plane Coordinate System Northing direction is to be in the “Y" axis and Easting direction to be in the "X” axis of the drawing. • The survey plat shall also show the elevation above sea level of the Point of Beginning or another monument as directed by the Monmouth County Park System and reference the North American Vertical Datum of 1988 (NAVD88).
