B17010 - County Road 36 Culvert #3 Abandonment & Road Reconstruction

B17010
County Road 36 Realignment
Address:  Station 22+00 to 33+00 Town of Naples
Prebid:  Monday, April 3, 2017 @ 10:00 AM at the Ontario County Department of Public Works Conference Room
Opening:  Wednesday, April 12, 2017 @3:00 PM, 20 Ontario Street 2nd Floor
Price:  $50
Set Includes:
            One Book
            One Set of Drawings
            CD is available
Scope:
Work under the base bid will consist of realigning County Road 36 between stations 22+00 and
33+00 and replacing a retaining wall. The project base bid will also include cross culvert
replacements, ditching, hot mix asphalt paving, guide rail replacements, highway signage
improvements, and other incidental construction necessary for completion of the project.
The Contractor’s attention is called to the close proximity of utilities at the project site.
The scope of this work includes, but is not limited to the following:
 Provide, maintain and remove temporary erosion control measures
 Clearing and grubbing highway right-of-way and work area
 Maintain and protect traffic for the duration of the project in conformance with NYSDOT
and MUTCD requirements
 Preserving, maintaining and relocating existing signs
 Locating, preserving and protecting existing utilities at all times
 Cast in place concrete forming and poring
 Maintain stormwater flows
 Construction of embankment and cut slopes
 Construction of new road and shoulders
 Cold mill pavement rebates between existing and proposed pavements
 Construction hot mix asphalt concrete pavements and shoulders to the line and grades shown
on the Contract Documents
 Laying out and applying permanent pavement markings
 Placing shoulder backup material to the proper lines and grades
 Installation of guide railing systems
 Restoration of all driveways and property disturbed by construction
 Turf establishment
 Incidental work necessary to completely and satisfactorily construct the project
The Work includes all labor, materials, equipment, transportation, disposal, and performing all
work in accordance with these Contract Documents, technical specifications and plans, as
ordered by Engineer.