Class A Blouse: - Navy Blue, thumb tip length, four-button front with New York State brass buttons, permanent shoulder epaulets with New York State brass buttons, two top pointed pocket flaps (not including pockets) and two bottom scalloped flaps with New York State brass buttons. The blouse has two (2) side vents and no rear vents. - Sleeves to be two-piece set in with shoulder pads and sleeve heads, with two New York State brass buttons on each sleeve. - Fabric to be 55% Dacron polyester/45% wool or 100% wool. - Fully lined permanent lining to be 100% polyester, with an inside breast pocket. - Fabric weight is to be 13.5 – 14.5 oz. per square yard. - Regulation New York State patches affixed to both shoulders. - Shield eyelet holes over the left breast spaced exactly 1-5/8” apart. - New York State brass buttons are gold color with NYS Seal embossed. Class A Trouser: - Navy Blue with ½” wide black mohair braid on the outer seam. A comparable material braid (such as nylon blend) may be used as a substitute. - Fabric to be 55% Dacron polyester/45% wool or 100% wool. - Fully lined permanent lining to be 100% polyester. - Fabric weight is to be 13.5 – 14.5 oz. per square yard. - Two (2) back hip pockets, and two (2) back Billy Pockets. Blouse and trouser must be a uniform match in fabric, weight, and color. Cap: - Dark Navy - Police Type, eight-point, winter uniform cap with black chin strap - New York State brass buttons Tie: - Black - Polyester, 3” wide x 14.5”, 18”, 20” or 22” length - Clip-On, breakaway Dress Gloves (pair): - White - 100% stretch nylon with raised stitching on the back - Snap Closure Shoes (pair): - Black leather military oxford compatible with Class A uniform - High shine, natural leather - Adjustable laces
