● Design and planning a. Attend on-site and virtual meetings for data collection b. Conduct surveys and site visits c. Specify details of sign features such as typeface, colors, materials and dimensions for various signage options d. Prepare floor plans indicating sign types and locations e. Demonstrate schematic and sign application through illustrations and renderings f. Demonstrate knowledge of graphic design standards such as effective treatment of symbols, maps, colors and templates g. Create templates for signage graphics h. Maintain a complete sign schedule indicating quantity, type, dimensions, material, mounting specifications and text for all signs i. Confirm all signs and locations conform to relevant local, state, and national codes j. Provide cost estimates for signage design and planning ● Fabrication and installation a. Produce mockups to test and visualize signage readability, color, and composition b. Provide cost estimates for signage fabrication and installation c. Generate a quantity list and services required for fabrication and installation of signs d. Survey all sign locations to identify proper installation, including load requirements e. Determine sign installation technique based on field surveys f. Provide shop drawings for all sign types g. Submit samples and revisions as needed h. Provide one full size prototype of each sign type, based on approved sample submissions i. Repair existing and install new signs as needed j. Confirm all signs and locations conform to relevant local, state, and national codes k. Prepare fabrication details for all signs l. Provide cost estimates for signage fabrication and installation ● General sign specifications a. All signage should have high quality fabrication and/or high-resolution application of graphics b. All strokes and letterforms should be crisp and true to form c. All laser etch and color fill should have square drafts and crisp infill, free from bleeding over edges of lettering d. All graphic elements should be durable and scratch resistant for a high-traffic college setting e. Fabricator should recommend any UV, anti-graffiti matte/satin finish coating to enhance durability of product, while maintaining the design intent of every sign f. All signs shall be smoothed and slightly eased, and free from sharp corners and edges
