Specifications include, but are not limited to:Water Pipe Class 52 Ductile Iron Push Joint Pipe: Pipe shall be centrifugally cast for water conforming to ANSI/AWWA A21.5/C151, The asphaltic outside coating shall be in accordance with ANSI/AWWA A21.51/ C151. The cement-mortar lining and inside coating shall be in accordance with ANSI/AWWA A21.4/C104 and ANSI/NSF 61. Rubber Gaskets furnished shall be in accordance with ANSI/AWWA A21.11/C111. All coatings, sealants and linings shall be listed by NSF International and conform to the requirements of ANSI/NSF 61, Drinking Water System Components-Health Effects. SDR 35 PVC Sanitary Sewer Pipe: Pipe shall meet the requirements of the latest ASTM Standard F-679. The pipe shall conform to the requirements of CSA B-182.2. Integral gasketed bell ends shall be provided on the pipe, the pipe joint must meet the requirements of ASTM Standard D-3212. The normal pipe length will be 14’+/-1” laying length Ductile-Iron Mechanical Joint Compact Fittings for Water Service : Fittings shall be ductile iron Class 350 and shall conform to all the requirements of ANSI/AWWA A21.53/C153. Fittings shall have protective asphaltic seal-coat and cement-mortar lining in accordance with ANSI/AWWA A21.4/C104. Rubber-Gasket Joints for Ductile Iron Pressure Pipe, Fittings, Accessories (glands, bolts and rubber gaskets) are to conform to ANSI/AWWA A21.11/C111.
