The Scope of Work includes both fabrication and installation of various types, sizes, and locations of gateway and wayfinding signs (referred to as “Project” or “Project Scope” in remaining document). The graphic design elements are shown by the details in Attachment B: Citywide Signage Program Fabrication and Installation, Phase I. These requirements are intended to establish the basic dimensions and appearance of signs. Within these limitations, the successful bidder (referred to as “Bidder” in remaining document) is responsible for fabrication of Phase I, and to make whatever modifications and additions to the details as may be required. The Bidder will provide a submittal of the signage proposed to the City of Euclid for approval prior to fabrication and installation. The Bidder shall engineer and fabricate signs to meet, at a minimum, the criteria below: • Comply with all Federal, State, and Local Codes; • Signs shall be fabricated and installed to withstand Ohio environmental factors such as wind, heat, snow, ice, and precipitation for a minimum life of five (5) years; • All fonts specified must be purchased by the Bidder for use in this Project; • All final output or implementation of typography and graphics are to be sharp (without serrated or irregular edges) and exactly true to the letter style and/or design form; • Signs shall be coated to protect against vandalism.