Specifications include, but are not limited to: SPECIFICATIONS FOR THE PURCHASE OF 2 X 12 SHED STYLE TRANSIT VEHICLE PASSENGER SHELTERS PART I GENERAL 1.1 SECTION INCLUDES Transit Stop Shelter – 2’ x 12’ – Shed Style with Solar Lighting – Exhibit A 1.2 QUANTITY 50 Min/150 Max – Transit Stop Shelter – 2’ x 12’ – Shed Style with Solar Lighting 1.3 REFERENCES • Federal Specifications (Fed. Spec.): oQQ-A-200/9C(1)…Extruded aluminum members 6063-T5 oHH-I-521B…Insulation board, Thermal, Semi-Rigid Polyurethane. oTT-S-001657…Sealants, Type 1. • American Society for Testing Materials (ASTM): oC-920-79…Elastomeric Joint Sealants Type S, Class 12, Grade NS oC-518...Insulation Board, Semi-Rigid Polyurethane. oE-84…Standards method of test for surface burning characteristics of building materials. • American National Standards Institute (ANSI): ANSI A58.1… Gravity and Lateral Loads Design. • Uniform Federal Accessibility Standards: FED-STD-795, 4/1/88….4.13 Door Accessibility. • The Aluminum Association (AA): Designation System for Aluminum Finishes (March 1973) • International Conference of Building Officials, Uniform Building Code. • Public Law 101-336: Current Standards of the Americans with Disabilities Act (ADA). 1.4 DESIGN REQUIREMENTS • Basic Wind Speed: 90 mph. • Exposure Category: _B_ • Basic Snow Load: 40 psf. III-1 ITEM 1 1.5 SUBMITTALS • Specified Manufacturer: Product shall be as manufactured by Brasco International, Inc., or an approved equal as outlined in Section 1, Item 36 – Qualifying of Approved Equal. • Shop Drawings: Submittal of manufacturer's shop drawings, including plans, elevations, sections and details, dimensions, anchorage, fasteners and locations, flashing and seal details if applicable, finish, and options by contractor after award. • Erection Drawings: Submittal of manufacturer’s instructions and drawings, and develop erection procedures to enable field installation and repair by contractor after award. 1.6 QUALITY ASSURANCE Manufacturer's Qualifications • Continuously engaged in Shelter manufacturing with a minimum of 10 years successful experience. • Able to demonstrate successful performance on comparable projects. • Responsible for all components, including structural design.
