Specifications include, but are not limited to: Type – Conventional regular cab, single axle drive. Gross Vehicle Weight Rating (GVWR) – 25,500 lb. Cab to Axle (CA) Dimension – 84 in. clear frame rails, top and sides, back of cab to center of rear axle. Ground Clearance – Configured to allow for 12 in. of ground clearance for the fuel, diesel exhaust fluid (DEF) tanks, and the diesel particulate filter. Cab Type – Conventional regular cab, full-width. Sound Proofing – Headliner, cab back pane, full height door panels, and insulated. Assist Handles – Drive side must be exterior type. Passenger side assist handle must be included. Glass – Tinted safety type. Gauges – All gauges must be back lighted, visible, readable from driver’s position, and include the following: speedometer with trip odometer, coolant temperature, battery charge rate, fuel, air pressure, tachometer, oil pressure, air application, and transmission temperature and hour meter. Seats - Driver seat must be high back, air suspension type with 2-position adjustable front cushions, adjustable rear cushion, 3-chamber air lumbar, adjustable side cushions, and right armrest. Passenger seat must be an air-ride high back with left armrest. All seats must have matching cloth upholstery. Steering Column – Adjustable tilt with 18 in. steering wheel. Power Windows – Electrically operated. Power Door Locks – Both doors. Door Pouches – Both doors. Cab Suspension - Air bag type with shocks to dampen movement. Passenger Side Visibility – Equipped with either a visibility window in the passenger door or equipped with a door-mounted down view optic convex mirror positioned to see objects parked next to the right side of the Truck. Hood - Tilting fiberglass with required insulation to dampen engine noise and equipped with fender extensions. Must include formed fiberglass or plastic inner fenders attached to hood and splashguards extending down the inner fenders. Grill – Equipped with 3/8 in. maximum opening radiator rock screen. Overhead Console - Full width of cab, equipped with three (3) storage compartments. Frame Type - Constant depth, single c-channel frame. Resisting Bending Moment – 950,000 in. lb. including front frame extension. Section Modulus – 12.0 cu. in. After Frame – 80 in. to accommodate the 13 ft. 6 in. service body to be installed. Truck chassis rear frame must be “clean CA” for installation of a utility type service body. Suspension & Axles Front Axle and Suspension – 8,000 lb. rated capacity with power steering rated for front axle capacity and shock absorbers. Rear Axle and Suspension – 17,500 lb. rated capacity spring suspension with driver controlled differential lock and magnetic drain plug. Wheels and Tires Wheels - Hub piloted aluminum 19.5 in. Nylon wheel guards must be located between wheels and hubs and between the dual wheels on the rear axles. Tires – Steel radial type: Front – Size 245/70R x 19.5, 14-ply highway tread, tubeless type, Michelin XZE, or equal tread pattern. Rear – Size 245/70R x 19.5, 14-ply highway tread, tubeless type, Michelin XDS2, or equal tread pattern.
