Specifications include, but are not limited to: Performing exterior masonry repairs consisting of tuckpointing approximately 5,000 linear feet of masonry joints and replacing approximately 100 units. Re-caulk joints in existing steel chimney cap. Perform exterior masonry repairs. Clean, repair, recoat and caulk existing steel tension bands. Clean, repair, and recoat existing exterior ladder and exterior platform handrails, grating, and support framing. Caulk cracks in existing concrete cap above the exterior breeching offset. Recoat exterior breeching, cleanout door and door frame. Place new heat-resistant insulation to fill existing gaps at breeching inlet. Check electrical continuity of air leads down through lightning protection to ground. Apply Siloxane Water Proofing to exterior brick after repairs completed. Inspect Chimney interior per specifications and perform interior tuckpointing and masonry repair. Replace existing FAA indication lights with LED lights with an IR signature.
