Specifications include, but are not limited to: • For bidding purposed, assume the use of copper conductors throughout and EMT conduit with rain tight fittings at all exterior locations. • Use Easton breakers in panel Failure Load Stage (FLS). See location on site plan. • Outfit panel FLS with new Easton breakers, two 2-pole 30 Amp and eight 1-pole Amp (location on site plan). • Furnish and install six dedicated 20-amp duplex receptacles served by Electrical Metallic Tubing (EMT) and raintight fittings. See site plan for locations. • Convert existing HVAC convenience duplex receptacle to a quad receptacle. See site plan for location. • Furnish and install one dedicated quad receptacle mounted to exterior wall of visitor center. See location on site plan • Furnish and install one duplex receptacle located on the west exterior wall of visitor center with new bell box on existing stub up provide circuit tracing to provide power to receptacle with allowance of $2,500. • Install commercial grade “in use” buddle covers at all exterior devices.
