Specifications include, but are not limited to: The Department of California Highway Patrol (CHP) is soliciting bids from firms that are able to provide FENCE REPLACEMENT Services. furnish all supplies, materials, tools, equipment, labor, personnel, and supervision; pay all taxes, insurance, bonds, license and permit fees, and all other direct and indirect costs necessary for the replacement of the fencing and installation of privacy slats; Work shall be performed on weekends or evenings unless other arrangements have been made with the CHP Facilities Coordinator and the on-site contact. A. Clear and remove all overgrown vegetation that is within five (5) feet of fence line. B. Contractor will remove approximately three-hundred ten (310) feet of existing chain link fence on southeast side of parking lot and dispose of off-site. C. Furnish and install new eight foot (8’) high perimeter fence panels (PFP) plus barbed/razor wire material according to the specification listed below. (Note: Fence to match existing height at North and South portions and per City code) D. Install new line posts every six feet (6’) on center - 2 7 /8” Schedule 40 set in 12” x 48” footing. E. Install privacy slats in new chain link fence for privacy. F. Top and mid rail - 1 5 /8” Schedule 40. G. Bottom tension wire 9 gauge smooth. H. Install three strands of barbed wire and finish with razor wire. I. Maintain a safe working environment to prevent injuries to CHP personnel or damage to CHP property.
