Specifications include, but are not limited to: This project consists of installing cameras and CCTV surveillance equipment listed. All cameras are to be vandal resistant and ingress protection (IP) rated for protection against dust and water intrusion. 1. Install one (1) 2.0 Megapixel, Pan Tilt Zoom (PTZ) Outdoor Day/Night IR Video Camera, Vandal Dome Camera (VDC), Samsung or equal. 2. Install two (2) 2.0 Megapixel, Indoor Day/Night IR Video Camera, Vandal Dome Camera (VDC), Samsung or equal. 3. Install five (5) 2.0 Megapixel, Indoor 2.8 mm lens, Vandal Bullet Camera, Samsung or equal. 4. Install Cisco 24 port, power over Ethernet (POE) switches or equal. All communication cabling shall be terminated in a patch panel located in the server room. 5. Install Network Video Recorder (NVR) with Video Management System Software or equal, and DVD Burner. Recording must include a minimum of 120 days of storage, at 7 frames per second, or higher. 6. Install one (1) CCTV independent viewing stations with 32" liquid-crystal display/high definition (LCD/HD) commercial grade Viewsonic color monitor or equal with keyboard, mouse, and monitor wall mount brackets. 7. Install new Category 6 cabling to accommodate new equipment, where needed. Equipment shall be rack mountable in the server room and is prohibited from being installed or connected to the CHP network computer system. Vendor shall not add or connect to any CHP computer.