Specifications include, but are not limited to: DIMENSIONS Interior Width: Maximum interior width clearance for 102” wide trailer with double wall construction. Exterior Width: Industry standard for 102” wide trailer with double wall construction. Interior Height: 84 inches. Exterior Height: Industry standard for 86 inch height interior & double wall -construction. Exterior Length: 234 inches CONSTRUCTION FRAME: Frame shall be constructed of Aluminum. WALLS / SIDING: Walls shall be double walled and insulated (industry standard) All joints shall be sealed in white caulking or joint seal to match aluminum skin (industry standard caulking or joint seal) Reinforced Stainless Steel Nose Cap (polished – no logos or markings) on exterior. FLOORS: Sub-Floors shall be made of aluminum or PlexCore decking. PAINT: Trailer shall be painted the manufacturer’s standards. All surfaces to be painted shall be prepared in accordance with the paint manufacturer’s recommendations to provide maximum paint adhesion. The finish coat shall be free from runs, drips, sags, etc., and shall be evenly applied to provide a gloss finish. CHASSIS Trailer payload capacity of > 12,000 lbs. Spring Axles with E-Z Lube Hubs Industry standard pull hitch Standard Manually Operated Jack, or an electronically operated Hydraulic Trailer Jack. Brakes: Electrical Brakes with breakaway kit. Wheels & Tires: All tires & wheels shall be identical (i.e., no cross brand or models). Spare Tire: A spare tire and wheel shall be supplied with a designated mounting location on the trailer. One set of tire changing tools with tire/wheel jack and spare tire lug wrench shall be included. POWER AND ELECTRICAL Lights: Interior: Industry standard interior trailer Dome LED lights (minimum of 1) DOORS / WINDOWS & VENTS Doors (heavy duty): 36” side door with Flush lock. Rear ramp door with spring assist. Side Vents: Industry standard flow through sidewall vents. COATING UNDER BELLY OF TRAILER Entire chassis undercoated.
