Specifications include, but are not limited to: To be mounted on 60” CA chassis, dual rear wheel, duel fuel tanks ___ ___ ____________ Load space width shall be 48.5” ___ ___ ____________ Side pack height shall be approximately 40” high ___ ___ ____________ 20” deep side packs constructed of 18ga A60 2-sided galvannealed steel ___ ___ ____________ Doors constructed of 18ga A60 2-sided galvannealed steel, both inner and outer door panel ___ ___ ____________ All hinges must be of stainless steel and be bolted on both the body and the door in case damage would occur to the door, and also for easy adjustment in the future ___ ___ ____________ Load space floor to be constructed of 10ga A60 2-sided galvannealed steel with tread plate diamond pattern ___ ___ ____________ No wheel wells shall be in load space ___ ___ ____________ Vertical doors supported open by gas shock ___ ___ ____________ Each vertical compartment shall have one galvanized adjustable shelf and divider ___ ___ ____________ Driver side horizontal compartment shall be open ___ ___ ____________ Passenger side horizontal compartment shall have one adjustable divider tray ___ ___ ____________ Stainless steel rotary door locks ___ ___ ____________ Install four (4) recessed d-rings in floor for load securement ___ ___ ____________ Entire body to be E coat primer process or equal ___ ___ ____________ Entire body including inside compartments and underside of body shall be powder coated red to match chassis TBD ___ ___ ____________ Understructure shall be undercoated ___ ___ ____________ The entire load space floor, side walls, and compartment tops shall be sprayed with a high quality liner material ___ ___ ____________ Body shall have a 6 year warranty ___ ___ ____________ Lifetime warranty on hinges and door locks
