Specifications include, but are not limited to: 1. MOUNTING: Glass mounts: Signs for mounting to glass are to be mounted with black double-sided foam tape. Contractor is to provide a 1 black backer per glass mount, the same size as the base plate, for the back side of glass. Standard Mechanical Mounts: Standard Signs attached to walls shall be mounted with double-sided foam tape and silicone. 2. MATERIALS: Signs must meet all ADA requirements include type face, characters, pictograms, finishes, and Braille. Signs are to be smooth satin finish acrylic with tactile graphics – meeting all ADA requirements. All edges are to be smooth, and routed, without any sharp areas. All signs must include a 1-year, full warranty, including parts and workmanship. 3. SHOP DRAWINGS & ARTWORK PROOFS & REMEDIES Contractor must submit shop drawings, artwork proofs and all field verification to obtain approval prior to producing the product. Electronic proofs may be sufficient for some items however some items may require proofing of artwork on a sample piece of material which must be provided to the University at no additional charge. The expectation is that shop drawings, artwork proofs and field verification must be met within 7 calendar days from notice of award. Shop drawings must show all sizes of components to be fabricated as well as all dimensions of existing building conditions affecting installation. Bidder is responsible for all costs associated with changes, if materials are ordered before receipt of approved shop drawings. All work must be performed in accordance with manufacturer’s installation and instruction. The University will not be liable for any product that is produced without prior written approval. When shop drawings and artwork submitted to the University is not approved, the Contractor has five (5) business days to cure any deficiencies and resubmit for approval.
