Specifications include, but are not limited to: A. Clear and remove all overgrown vegetation that is within 5 feet of fence line. B. Contractor will remove approximately 600 feet of existing chain link fence on all sides of parking lot and dispose of off-site. C. Furnish and install new 8’ high perimeter fence panels (PFP), with post extensions, plus barbed/razor wire material according to the specification listed below. D. Install 80% privacy slats in new chain link fence for privacy. E. Install three strands of barbed wire and finish with razor wire. F. Front gate(s) - 80% privacy slats to be installed at intervals to accommodate high wind conditions. G. Maintain a safe working environment to prevent injuries to CHP personnel or damage to CHP property. H. The Contractor, at no expense to the State of California, will repair any damage caused by the Contractor or any of his/her workers. I. The Contractor must field verify any and all measurements encompassed in this project and is solely responsible for their accuracy. J. The Contractor will keep the work site clean and haul away any worksite debris. All removed material must be recycled where possible. K. Warranty all parts and workmanship for a period of one (1) year. Contractor to supply the manufacturer’s warranties and manuals for any parts used in this project.