Page 2 of 3 THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A REQUEST FOR QUOTE. The NCO 12, Great Lakes Acquisition Center, 115 S. 84th Street, Suite 101, Milwaukee, WI 53214, is performing market research to determine if there is a sufficient number of qualified: (1) Service Disabled Veteran Owned Small Business (SDVOSB); (2) Veteran Owned Small Business (VOSB); or (3) Small or emerging small business firms, or (4) Other Than Small business firms, to provide Treadmill for the Milwaukee VAMC. General Requirements: Brand Name or Equal: PPS 55 Slat Belt Medical BariMill Medical Treadmill and its requested accessories: a) Must have the LCD display with readouts including: speed, incline, distance, calories, time/pace heart rate. b) Must have 120V-20A-HOSPITAL voltage. c) The elevation must reach between 0-25% incline. d) Must have adjustable parallel handrails. e) The width of the treadmill must have a maximum width of 41 inches. f) The length of the treadmill must have a minimum length of 73 inches. g) The height of the treadmill must have a maximum height of 62 inches. h) The running surface of the treadmill must be vulcanized rubber (38-43 shore hardness), individual slats, zero stretch, zero slip toothed, wire-reinforced lateral belts. i) The dimensions of the running surface must have a minimum of 22 inches W x 70 inches L. j) Must have a minimum user weight capacity while running of 400 pounds. k) Must have a minimum user weight capacity while walking of 800 pounds. l) Must have a speed range if 0-12.5 miles per hour, zero start (0.1 mph increments). m) Must have a Polar heart rate telemetry RS232 serial port to connect to compatible equipment. n) Must have a magnetic emergency stop button on handrail and wired remote. All interested firms who can meet the requirements stated above should respond, in writing, INCLUDING ALL THE FOLLOWING: Company name. Address. Point of contact (name/title/telephone number/e-mail address). FSS / SEWP Contract number, if applicable. SAM Unique ID number. Tax ID number. Indication of which business category (SDVOSB, VOSB, Small Business or Other Than Small Business) for which the organization qualifies. A capability statement that addresses the organizations qualifications and ability to provide the requirement depicted above. Documentation from manufacturer (i.e. correspondence from manufacturer) of your firm being an authorized distributor for the manufacturer. Submit responses to the Contracting Specialist, Matthew Hohl, at Matthew.Hohl@va.gov no later than 11:59 PM (Central Standard Time), July 20th, 2023. 36C25223Q0809 Treadmill shall be referenced on all correspondence regarding this announcement. TELEPHONIC INQUIRIES WILL NOT BE ACCEPTED. The NAICS Code 339112, Surgical and Medical Instrument Manufacturing, is applicable to this acquisition; the size standard is 1,000 employees. Interested firms are reminded that in accordance with FAR 4.12, prospective contractors shall complete electronic annual representations and certifications in conjunction with FAR 4.11 required registration in the Systems for Award Management (SAM) database prior to award of a contract. The Government will use responses to this notice to make an appropriate acquisition decision. This is the only notice; no other copies of this notice will be provided.
