******PLEASE REVIEW THE UPDATED PRICELIST QUOTE SHEET***** The last item DRUG UA is for the 12 -Panel test**** AS WELL AS THE Q&A #20***** This has been extended until 13 May 2024 @11A.M.
1.0 This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.
1.1. The combined synopsis is issued as a Request for Proposal (RFP) under solicitation number: W50S6Q-24-R-A001
1.2. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC)
1.3. Small Business Set-Aside: 100%; Applicable Size Standard is $41.5M
1.4. NAICS Code: 621511 Medical Laboratories
1.5. Product or Service Code (PSC): Q301 Medical Laboratory Testing
1.6. Posting Date: 2 April 2024
1.7. Response Date: 13 May 2024
1.8. Contracting Office: 188 MSG/MSC, 4850 Leigh Avenue, Fort Smith, AR 72903
1.9. Government Points of Contact: Contracting Officer: MSgt Robin Swaim-Cherry and Contract Specialist: Mr. Samuel Bond
1.10. Line item number(s) and items, quantities, and units of measure
1.10.1. Per attached Pricelist Quote sheet
1.11. Description of requirements for the services to be acquired:
The contractor must be able to provide services that allow for the completion of laboratory services as needed. This contract is to provide support that the 188th Medical Group is unable to accomplish. The PWS includes an itemized list of laboratory tests required.
1.12. Date(s) and place(s) of delivery and acceptance and FOB point:
The Period of Performance will be for five years. Place of performance will be at a licensed medical facility or its laboratory sites that are no grater than 30 minutes from the 188th Wing and still within the Fort Smith Metropolitan Statistical Area. The services must be available Sunday through Saturday 0730-1600.
1.13. Provision 52.212-1, Instructions to Offerors-Commercial Products and Commercial Services, and addendum applies to this acquisition.
1.14. Offerors shall include a completed copy of 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services with its quote.
1.15. FAR 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services applies to this acquisition.
1.16. FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Products and Commercial Services, applies to this acquisition. See clause below, in full text, for list of additional applicable clauses.
1.17. Additional contract provisions and clauses are applicable and included below.
1.18. Defense Priorities and Allocations Systems (DPAS) Rating: Not rated.
52.212-1 INSTRUCTIONS TO OFFERORS-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAR 2023)
(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation. However, the small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition—
(1)Is set aside for small business and has a value above the simplified acquisition threshold;
(2)Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or
(3)Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.
(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show—
(1) The solicitation number;
(2) The time specified in the solicitation for receipt of offers;
(3) The name, address, and telephone number of the offeror;
(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;
(5) Terms of any express warranty;
(6) Price and any discount terms;
(7) "Remit to" address, if different than mailing address;
(8) A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);
(9) Acknowledgment of Solicitation Amendments;
(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and
(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.
(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.
(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during preaward testing.
(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with FAR subpart 4.10), or alternative commercial products or commercial services for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately.
(f) Late submissions, modifications, revisions, and withdrawals of offers.
(1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.
(2)
(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and-
(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or
(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government’s control prior to the time set for receipt of offers; or
(C) If this solicitation is a request for proposals, it was the only proposal received.
(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.
(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.
(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.
(5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.
(g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.
(h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.
(i) Availability of requirements documents cited in the solicitation.
(1)
(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to-
GSA Federal Supply Service Specifications Section
Suite 8100 470 East L’Enfant Plaza, SW
Washington, DC 20407
Telephone (202) 619-8925
Facsimile (202) 619-8978.
(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.
(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:
(i) ASSIST ( https://assist.dla.mil/online/start/).
(ii) Quick Search ( http://quicksearch.dla.mil/).
(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by-
(i) Using the ASSIST Shopping Wizard ( https://assist.dla.mil/wizard/index.cfm);
(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or
(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.
(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.
(j) Unique entity identifier.(Applies to all offers that exceed the micro-purchase threshold, and offers at or below the micro-purchase threshold if the solicitation requires the Contractor to be registered in the System for Award Management (SAM).) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity identifier that identifies the Offeror's name and address. The Offeror also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Offeror to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Offeror should indicate that it is an offeror for a Government contract when contacting the entity designated at www.sam.gov for establishing the unique entity identifier.
(k) [Reserved]
(l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:
(1) The agency’s evaluation of the significant weak or deficient factors in the debriefed offeror’s offer.
(2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.
(3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.
(4) A summary of the rationale for award;
(5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful offeror.
(6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.=
(End of provision)
***Addendum to FAR 52.212-1***
2.0 PROPOSAL SUBMISSION INSTRUCTIONS
2.1 Submission Due Date. The offeror must ensure its proposal, in its entirety, reaches the required destination before the date and time set for closing of the solicitation. The submission due date for this solicitation is 8 May 2024 at 11:00 AM (local time).
2.2 Late Proposals. The lateness rules for submitted proposals are outlined in FAR 52.212-1 "Instructions to Offerors-Commercial Products and Commercial Services," and are incorporated into this solicitation.
2.3 Submission. The proposal submitted in response to this solicitation shall be formatted as stated below and furnished electronically to the Contracting Officer (KO), MSgt Robin Swaim-Cherry, robin.swaim-cherry@us.af.mil and the Contract Specialist (CS), Mr. Samuel Bond, samuel.bond.1@us.af.mil . The proposal shall only be submitted as described.
2.4 Proposal Compliance. The Government must have received from the offeror a fully compliant proposal. The proposal is compliant when it conforms to all of the requirements, terms, and conditions of the solicitation, including the Performance Work Statement (PWS).
2.5 Proposal Acceptance. The contractor shall make a clear statement in the proposal as to the expiration date of the proposal and the stated expiration date shall be valid for all proposed subcontractors as well.
2.5.1 FAR 52.212-1(c) is hereby tailored for this solicitation: The contractor shall specify a proposal acceptance period in the Proposal Summary of not less than 60 days from the date of the solicitation closing. This date may be extended by mutual agreement.
2.6 Proposal Retention. In accordance with FAR Subpart 4.8, Government Contract Files, the Government will retain one copy of all unsuccessful proposals.
2.7 Single Proposal Submission. FAR 52.212-1 is hereby tailored to remove subparagraph (e), which does not apply to this solicitation.
2.7.1 Offerors are limited to submitting one proposal with one approach to meeting all the requirements of this solicitation.
2.7.2 Proposals that contain alternative terms and conditions will be considered as taking exception to the requirements of the solicitation.
2.8 Optional Proprietary and Restrictive Markings
2.8.1 Mark the title page with the following legend:
“This proposal includes data that shall not be disclosed outside the Government and shall not be duplicated, used, or disclosed -- in whole or in part -- for any purpose other than to evaluate this proposal. If, however, a contract is awarded to this offeror as a result of -- or in connection with -- the submission of this data, the Government shall have the right to duplicate, use, or disclose the data to the extent provided in the resulting contract. This restriction does not limit the Government’s right to use information contained in this data if it is obtained from another source without restriction. The data subject to this restriction are contained in sheets [offeror shall insert numbers or other identification of sheets]”
and
2.8.2 Mark each sheet of data it wishes to restrict with the following legend:
“Use or disclosure of data contained on this sheet is subject to the restriction on the title page of this quote.”
3.0 PROPOSAL FORMAT
3.1 This section provides guidance to the offeror for preparing a proposal in response to the solicitation. The offeror’s proposal shall include all data and information required by this solicitation and submitted in accordance with these instructions. Any contract resulting from this effort shall be required to meet United States Government regulations and statutory requirements. In addition, the offeror is expected to ensure compliance with all laws, regulations, standards, and any other constraints specifically identified in the solicitation.
3.2 The proposal submitted in response to the solicitation shall be formatted as stated below and furnished as stated herein.
3.2.1 The acceptable electronic formats for proposals shall be compatible with MS Office 2013, specifically MS Word and MS Excel; PDF format is acceptable as well.
3.2.2 All volumes shall be electronic files and not be password protected.
3.3 Offerors shall scan all files for computer viruses prior to submission to the Government.
4.0 PROPOSAL CONTENT AND ORGANIZATION
4.1 The offeror shall prepare the proposal so that the Government can identify that all required test listed and supplies required in the performance work statement are priced individually on the provided spreadsheet for all 5 years.
5.0 PROPOSAL DOCUMENTS
5.1 Proposals shall be clear and concise and include sufficient detail for effective evaluation. The offeror shall not simply rephrase or restate the Government’s requirements but shall provide convincing rationale to address how the offeror intends to meet those requirements. The offeror should assume the Government has no prior knowledge of its capabilities and experience. The Government will base its evaluation on the information presented in the offeror’s proposal in response to this solicitation.
5.2 Proposals shall be structured in accordance with the Contract Line Item Number (CLIN) structure set forth in the solicitation.
5.3 PROPOSAL SUMMARY shall include:
• Solicitation No. W50S6Q-24-R-A001
• Date submitted
• Offeror’s name
• Offeror’s address, CAGE code, and UEI
• Offeror contact information for proposal POC(s)
• All proposed subcontractor(s) (as applicable) (Medical Lab)
• Address, CAGE code, and UEIDs for each proposed subcontractor
• Porposal Acceptance Period
5.4 Signature Actions/offeror Fill-Ins. Offerors shall submit a copy of all completed fill-ins for provisions and clauses requiring contractor provided information, and (if applicable) a signed copy of all amendments to the solicitation. System for Award Management (SAM) certifications need not be separately submitted; however, all offerors must be successfully registered and valid in SAM prior to award
5.5 Any exceptions taken to the attachments, exhibits, enclosures, or other solicitation terms, conditions, or documents may be grounds for the Contracting Officer to reject the quote from further consideration in the source selection process.
5.6 Assumptions. The offeror shall consolidate and identify all offeror's generated "assumptions" contained anywhere in the quote. Also, the offeror shall include a statement that none of the "assumptions" contradict or take exception to any terms, conditions, or requirements of the solicitation. Any exceptions taken to the attachments, exhibits, enclosures, or other solicitation terms, conditions, or documents may be grounds for the KO to reject the quote from further consideration in the source selection process.
6.0 TECHNICAL CAPABILITY, shall include:
6.1 The Technical Capability section of the quote shall present relevant information articulating the offeror’s proposed approach to meeting the PWS requirements. This section shall clearly demonstrate the offeror’s understanding by providing a clear description of the proposed approach to performing the work. The offeror’s description should include a clear description of all processes and procedures employed. Offerors shall provide relevant experience (for this purpose, experience refers to what an offeror has done, not how well it was accomplished) in performing proposed processes and procedures. This section shall not include any pricing data. The offeror’s proposal/quote information will be evaluated to assess the risk that the offeror will timely meet contract requirements.
7.0 PAST PERFORMANCE, shall include:
7.1 The offeror shall submit information for a total of up to three years of recent contract past performance references that were performed by the offeror as the prime contractor, which the offeror considers to have relevance. These may include foreign, federal, state, local and private industry contracts.
7.1.1 While the Government may elect to consider data obtained from internal and external sources other than the proposal, the burden of providing thorough and complete past performance information remains with the offeror. It is the offeror's responsibility to submit detailed and complete information so the Government may evaluate its Past Performance.
7.2 The Government does not assume the duty to search for data to cure problems it finds in proposals.
7.3 The below instructions are provided to advise offerors as to the information required by the Government to assess the contractor's Recent and Relevant past performance. Since this information constitutes a basis of the Government's review, it is imperative that the offeror present its past performance in a clear and complete manner.
7.3.1 Failure to provide the information requested below may result in an assessment that the offeror does not possess a record of Recent and Relevant past performance.
7.3.2 Recent contracts are those performed within three years of the date of issuance of this solicitation.
7.3.3 Relevant contracts are those comparable in scope and magnitude of effort and complexity to the PWS requirement(s).
7.3.4 The offeror may also be evaluated based on other internal Government or private source information. The Government may utilize the Contract Performance and Rating System (CPARS) to search for recent and relevant offeror performance and ratings.
7.4 The Government will conduct an in-depth evaluation of all recent performance information to determine how closely the services performed under those contracts relate to the technical requirement(s). Consideration will be given to similar service, similar complexity of the effort, breadth and depth of skills, similar contract scope and type, and schedule.
7.5 The offeror may provide a copy of its most recent CPARS evaluation, if applicable, showing the overall rating(s) for each of the past performance references provided in the quote.
8.0 PRICE, shall include:
8.1 Price Quote Format.
8.1.1 Electronic file formatted in Adobe, MS Excel or Word.
8.1.2 Under no circumstances is price information and documentation to be included elsewhere in the quote.
8.2 The price quote shall contain:
8.2.1 The offeror shall submit data substantiating the price proposed to complete the requirements identified in the solicitation. The offeror’s price quote shall contain sufficient factual information to establish that the proposed price is reasonable and complete.
8.2.2 The offeror shall provide
• The total price for all required labs and supplies for 5 years on the provided sheet.
8.2.3 Reserved
8.2.4 In accordance with FAR 13.106-3(a), in addition to the information requested above, the Government reserves the right to request additional or more detailed information to support its evaluation of price reasonableness.
9.0 ORGANIZATIONAL CONFLICT OF INTEREST
9.1 The provisions of FAR 9.5, OCI, apply to any award under this solicitation. Potential offerors should review their current and planned participation in any other Government contracts, subcontracts, consulting, or teaming arrangements where they may be in a position of actual or perceived bias or unfair competitive advantage. A common example with the potential for OCI is where an entity performs work both as a system contractor/subcontractor and as a Government support contractor for Government offices involved in supporting program efforts or related programs.
9.2 All offerors shall make a preliminary disclosure to the PCO, at the time of its quote, of any Organizational Conflict of Interest (OCI) issues it has identified or provide an affirmative statement that the offeror does not have an Organizational Conflict of Interest (OCI) as it applies to this solicitation.
9.2.1 An offeror failing to submit an OCI plan that it is later determined should have been submitted, could cause the quote to be rejected and no longer be considered for award. Offerors shall include in its plan where its employees are located and the total of employees in the location(s).
9.3 Offerors should disclose any potential OCI situations to the PCO as soon as identified including prior to quote submission. The disclosure should include the facts and an analysis of the actual or perceived conflict and a recommended approach(s) to neutralize or mitigate the potential conflict. The preferred approach to potential conflicts is to negate/obviate the conflict. Mitigation is considered only if it is not practical to negate/obviate the conflict. The PCO will promptly respond to resolve any potential conflicts.
10.0 EVALUATION FACTORS FOR AWARD
10.1 The Government will award a contract resulting from this solicitation to the responsible offeror whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:
10.1.1 Technical Capability
10.1.2 Past Performance
10.1.3 Price
10.2 Basis for Award
10.2.1 The Government intends to award a single Blanket Purchase Agreement (BPA) as a result of this solicitation.
10.2.2 Per FAR 9.103, the contract will be placed only with an offeror that the Contracting Officer determines to be responsible, that is, those who can satisfactorily perform the necessary tasks and deliver the required services on time. Prospective offerors, in order to qualify as sources for this acquisition, must be able to demonstrate that they meet standards of responsibility set forth in FAR 9.104. In addition, the Government may assess the offeror’s financial ability to meet the solicitation requirements. No award can be made to an offeror who has been determined to be not responsible by the Contracting Officer.
10.2.3 Consistency. Each section of the offeror’s quote shall be consistent within the proposal.
10.2.4 Completeness. The Government’s ability to evaluate a proposal may depend on the level of detail and supporting documentation provided. Insufficient supporting documentation or detail in a proposal may prevent the Government from evaluating a proposal.
10.2.5 The Government will assess the offeror’s proposal on three factors: (1) Technical Capability, (2) Past Performance and (3) Total Price (TP).
10.3 EVALUATION OF TECHNICAL CAPABILITY
10.3.1 Evaluation of this factor will assess the offeror's proposed approach and understanding of the requirements and risk of unsuccessful performance of the proposed approach to technical capability in accordance with the PWS.
10.4 EVALUATION OF PAST PERFORMANCE
10.4.1 The evaluation of this factor will assess the risk of unsuccessful performance of the offeror’s proposed approach to performing efforts of a similar scope, magnitude, and complexity as the requirement described in the PWS.
10.4.2 The Government will evaluate the offeror’s past performance to determine the likelihood that the offeror will successfully perform the required effort described in the PWS.
10.4.3 Contracts submitted in the Past Performance section of the offeror's proposal will not be considered if the Government determines them to be not recent, not relevant, or lacking any credible past performance information. If the offeror does not have a record of Recent and Relevant past performance information the offeror will be rated as "Neutral,” which is neither favorable nor unfavorable.
10.4.4 The offeror may also be evaluated on past contract performance information utilizing internal Government or private source information and the Government reserves the right to use any information received as part of its evaluation. The Government may contact any of the references the offeror provides and reserves the right to use any information received as part of its evaluation.
10.4.5 In evaluating the offeror's performance history, the Government may compare the offeror's deliveries or performance to the contract's original delivery or performance schedule, unless the delay was Government-caused. Schedule extensions that were the fault of the offeror, even if consideration was provided, may be counted against the offeror.
10.5 EVALUATION OF PRICE FACTOR
10.5.1 Evaluation of price will be performed using one or more of the price analysis techniques in FAR 13.106-3. Through these techniques the Government will determine whether prices are reasonable, complete, and are not unbalanced.
10.5.2 Reasonableness. The Government will evaluate the price reasonableness of the offerors' proposed prices to ensure that in its nature and amount, it does not exceed what would be incurred by a prudent person in the conduct of competitive business. The Government shall employ price analysis techniques in accordance with FAR 13.106-3 to determine that a proposed price is fair and reasonable.
10.5.3 Completeness. The Government reserves the right to conduct discussions with offerors, but discussions are not anticipated or intended. Since discussions are not anticipated or intended, the Government requires complete quotes with respect to price. A complete quote will include all information required by this solicitation.
10.5.4 Unbalanced Pricing. Offerors should note that pricing will be carefully reviewed to detect whether quotes are unbalanced between line items, as well as unbalance between periods. Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more line items is significantly over or understated as indicated by the application of cost or price analysis techniques. Unbalanced offers may be determined unacceptable.
Additional Clauses and Provisions:
52.219-1
52.232-39
52.219-14 Limitations on Subcontracting.
As prescribed in 19.507(e), insert the following clause:
Limitations on Subcontracting (Oct 2022)
(a) This clause does not apply to the unrestricted portion of a partial set-aside.
(b) Definition. Similarly situated entity, as used in this clause, means a first-tier subcontractor, including an independent contractor, that—
(1) Has the same small business program status as that which qualified the prime contractor for the award (e.g., for a small business set-aside contract, any small business concern, without regard to its socioeconomic status); and
(2) Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor assigned to the subcontract.
(c) Applicability. This clause applies only to—
(1) Contracts that have been set aside for any of the small business concerns identified in 19.000(a)(3);
(2) Part or parts of a multiple-award contract that have been set aside for any of the small business concerns identified in 19.000(a)(3);
(3) Contracts that have been awarded on a sole-source basis in accordance with subparts 19.8, 19.13, 19.14, and 19.15;
(4) Orders expected to exceed the simplified acquisition threshold and that are—
(i) Set aside for small business concerns under multiple-award contracts, as described in 8.405-5 and 16.505(b)(2)(i)(F); or
(ii) Issued directly to small business concerns under multiple-award contracts as described in 19.504(c)(1)(ii);
(5) Orders, regardless of dollar value, that are—
(i) Set aside in accordance with subparts 19.8, 19.13, 19.14, or 19.15 under multiple-award contracts, as described in 8.405-5 and 16.505(b)(2)(i)(F); or
(ii) Issued directly to concerns that qualify for the programs described in subparts 19.8, 19.13, 19.14, or 19.15 under multiple-award contracts, as described in 19.504(c)(1)(ii); and
(6) Contracts using the HUBZone price evaluation preference to award to a HUBZone small business concern unless the concern waived the evaluation preference.
(d) Independent contractors. An independent contractor shall be considered a subcontractor.
(e) Limitations on subcontracting. By submission of an offer and execution of a contract, the Contractor agrees that in performance of a contract assigned a North American Industry Classification System (NAICS) code for—
(1) Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract;
(2) Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;
(3) General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 85 percent subcontract amount that cannot be exceeded; or
(4) Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 75 percent subcontract amount that cannot be exceeded.
(f) The Contractor shall comply with the limitations on subcontracting as follows:
(1) For contracts, in accordance with paragraphs (c)(1), (2), (3) and (6) of this clause—
[Contracting Officer check as appropriate.]
□ By the end of the base term of the contract and then by the end of each subsequent option period; or
□ By the end of the performance period for each order issued under the contract.
(2) For orders, in accordance with paragraphs (c)(4) and (5) of this clause, by the end of the performance period for the order.
(g) A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause will be performed by the aggregate of the joint venture participants.
(1) In a joint venture comprised of a small business protégé and its mentor approved by the Small Business Administration, the small business protégé shall perform at least 40 percent of the work performed by the joint venture. Work performed by the small business protégé in the joint venture must be more than administrative functions.
(2) In an 8(a) joint venture, the 8(a) participant(s) shall perform at least 40 percent of the work performed by the joint venture. Work performed by the 8(a) participants in the joint venture must be more than administrative functions.
(End of clause)
252.232-7003
252.232-7006 Wide Area WorkFlow Payment Instructions.
As prescribed in 232.7004 (b), use the following clause:
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)
(a) Definitions. As used in this clause—
“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.
“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.
“Payment request” and “receiving report” are defined in the clause at 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.
(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.
(c) WAWF access. To access WAWF, the Contractor shall—
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/
(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.
(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) Document type. The Contractor shall submit payment requests using the following document type(s): COMBO
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items—
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
____________________________________________________________
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
____________________________________________________________
(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]
(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in WAWF
Pay Official DoDAAC F87700
Issue By DoDAAC W50S6Q
Admin DoDAAC** W50S6Q
Inspect By DoDAAC F6Q4MD
Ship To Code F6Q4MD
Ship From Code
Mark For Code
Service Approver (DoDAAC)
Service Acceptor (DoDAAC)
Accept at Other DoDAAC
LPO DoDAAC
DCAA Auditor DoDAAC
Other DoDAAC(s)
(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”)
(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.
Robin.Swaim-Cherry@us.af.mil or Samuel.Bond.1@us.af.mil
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of clause)
52.204-10
52.204-23
52.204-24
52.204-25
52.204-26
52.204-27
52.204-29
52.204-30
52.212-3
52.212-5
52.222-50
52.246-1
252.204-7016
252.204-7017
252.204-7018
252.204-7024
252.239-7098
252.225-7024
252.225-7055
252.225-7056
252.225-7059
252.225-7060
All questions are required to be submitted to the Contracting Office (robin.swaim-cherry@us.af.mil) no later than April 23, 2024 @ 11:00 AM CST.
