THIS SOURCES SOUGHT IS FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A SOLICITATION.
All interested parties, please provide an email to Gustavo.Davila@us.af.mil with interest in providing the supplies as listed below:
Borescope with Blade Turning Tool Kit.
List of items required for kit:
- Motor, Drive-Core Engine Rotation (CFM56-2)
- Borescope, Videoprobe – Flexible
- Borescope Resolution Monitor
- 35mm camera
- Video Monitor
- Borescope set, is stored in a carrying case (a) Optical system specifications.
- Distal focusing - adjustment at eyepiece.
- Depth of field - 6 mm to 100 mm.
- Angle of view - 90 degrees.
- Diopter adjustment - minus 6D to plus 4D.
- Magnification - 1:1 at 25 mm.
- Objective focal distance - 2.13 mm.
- Lens speed - f 2.8.
- Image bundle size - 1.7 mm square.
- Single fiber image guide - 17 microns.
- Illumination - inherent light guide with 5 feet extension. (b) Distal tip specifications.
- Size - 6 mm dia x 20 mm long.
- Side view - 90 degrees to centerline of probe. (c) Bending section (articulated tip) specifications.
- 1Angulation controllable at eyepiece 180° (90° up - 90° down).
- Minimum bend radius - one in. (25,4 mm).
- Length of bending section - 50 mm. (d) Flexible cable-probe specifications.
- Working length - 70 in. (1800 mm).
- Outside diameter over working length - 6 mm.
- Covering on cable - stainless steel braid.
- Temperature range - 0°F to 200°F (- 18°C to 93°C) continuous operation
- Borescope guide tube kit for HP turbine and HPT shroud
