REQUEST FOR QUOTE 70Z08524Q30126B00
QUOTE DUE NLT: 08/14/2024, 12 PM EST
ITEM REQUIRED DELIVERY DATE: SEE BELOW
NAICS 334515
- This is an UNRESTRICTED combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR Part 12 - Acquisition of Commercial Products and Commercial Services | Acquisition.GOV and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued.
- Request for Quote number in header applies and is used as the solicitation number. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87, effective, 7 March 2016.
- It is anticipated that a competitive price purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, (vendor must have an active registration in SAM.Gov prior to award) which if timely received, shall be considered by this agency.
- Payments are NET 30 and will be made in accordance with the FAR 52.232-25 Prompt payment clause 52.232-25 Prompt Payment. | Acquisition.GOV.
- All acquisitions expected to exceed $10k can also be found on SAM.GOV under the same solicitation/RFQ listed in the header.
- The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order.
IMPORTANT**PLEASE READ:
It is the Government’s belief that only the OEM, HENSOLDT SENSORS GMBH (CAGE CODE D1901) and/or their authorized distributors, can obtain the required technical and engineering data and genuine OEM parts required to successfully provide these items. Authorized distributors having the expertise and required capabilities to provide these items are invited to submit a quote. If you submit a quote for this solicitation, IT MUST include a letter from the OEM, verifying your company is an authorized HENSOLDT SENSORS GMBH (CAGE CODE D1901) distributor.
- The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items:
Vendor shall provide:
VENDOR NAME:
VENDOR ADDRESS:
VENDOR SAM.GOV UEI:
VENDOR PHONE:
VENDOR EMAIL:
NO SUBSTITUTIONS WILL BE AUTHORIZED WITHOUT APPROVAL FROM USCG SFLC TECHNICAL EXPERTS.
LINE ITEM 1
NSN: 6625 01-F14-3832
DESCRIPTION: ABSORBER
MFG NAME: HENSOLDT SENSORS GMBH
PART_NBR: 80054402
QUANTITY: 2 EA
UNIT PRICE: ______________________
TOTAL PRICE (Shipping must be included): ________________________
DESCRIPTIVE DATA:
NIIN: 01-F14-3832
P/N: 80054402
ITEM: ABSORBER
MFR: HENSOLDT
CAGE: D1901
QTY PER HULL: 1
ESTIMATED LEAD TIME: 8 MONTHS
PACKAGING SPECS:
1.) MIL-STD-20731E - REFER TO METHOD 10. PACKAGING SHOULD BE APPROPRIATE TO PART
SIZE, WEIGHT, AND MUST WITHSTAND MULTIPLE WORLDWIDE SHIPMENTS IN VARIOUS SHIPPING
CONDITIONS / CLIMATES. PART MUST BE APPROPRIATELY SECURED, AND CUSHIONED BY FOAM OR
BUBBLE WRAP TO PREVENT EXCESSIVE MOVEMENT AND DAMAGE DURING SHIPPING.
1.A) ELECTROSTATIC DISCHARGE (ESD) ITEMS TO COMPLY WITH METHOD 41, PARAGRAPH 3.7;
5.2.4.1 & TABLE J-IA IAW MIL-PRF-81705E (**ONLY IF APPLICABLE TO PART**)
2.) INDIVIDUALLY PACKAGED AND LABELED IAW MIL-STD-129P CH.4, REQUIRED ID MARKING EX:
PARAGRAPH 4.1 FIGURE 1 - MARKINGS SHALL COMPLY WITH PACK TYPE / MATERIALS AS
REFERENCED IN DOCUMENT. LABELS: IAW MIL-STD-129P W/ CHANGE 4, PARAGRAPH 4.1
IDENTIFICATION MARKINGS: BARCODING IS NOT REQUIRED. (PG.21).
2.A) VISIBLY MARK / LABEL ALL ELECTRONIC EQUIPMENT WITH "STORE INDOORS ONLY"
WARNING. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED, AND / OR LABELED WITH THE
REQUIRED FORMAT WILL BE RETUREND TO THE VENDOR FOR REPACKAGING.
END USE: 75 RADAR RACK 5 RF ABSORBER COOLING
PACKAGING AND MARKING REQUIREMENTS:
PACKAGE LABEL MUST INCLUDE:
ITEM NAME
PART NUMBER
NSN
QNTY: (EXAMPLE 1 EA)
COND-A
CONTRACT NUMBER / ORDER NUMBER
FOR TECHNICAL QUESTIONS ONLY:
POC: RANDOLPH ARAGON
PH: 410-762-6149
EMAIL: RANDOLPH.E.ARAGON@USCG.MIL
ALL ITEMS REQUIRED DELIVERY DATE: 04/15/2025
If unable to meet required delivery date, please provide DD: ________
- NO SUBSTITUTIONS.
LINE ITEM 2
NSN: 5895 12-344-3445
DESCRIPTION: GENERATOR, DIGITAL CLOCK PULSE
MFG NAME: HENSOLDT SENSORS GMBH
PART_NBR: 54.2325.122.00
QUANTITY: 2 EA
UNIT PRICE: ______________________
TOTAL PRICE (Shipping must be included): ________________________
DESCRIPTIVE DATA:
NIIN: 12-344-3445
P/N: 54.2325.122.00
ITEM: DIGITAL CLOCK GENERATOR
MFR: HENSOLDT
CAGE: D1901
QTY PER HULL: 1
ESTIMATED LEAD TIME: 12
PACKAGING SPECS:
1.) MIL-STD-20731E - REFER TO METHOD 10. PACKAGING SHOULD BE APPROPRIATE TO PART
SIZE, WEIGHT, AND MUST WITHSTAND MULTIPLE WORLDWIDE SHIPMENTS IN VARIOUS SHIPPING CONDITIONS / CLIMATES. PART MUST BE APPROPRIATELY SECURED, AND CUSHIONED BY FOAM OR BUBBLE WRAP TO PREVENT EXCESSIVE MOVEMENT AND DAMAGE DURING SHIPPING.
1.A) ELECTROSTATIC DISCHARGE (ESD) ITEMS TO COMPLY WITH METHOD 41, PARAGRAPH 3.7;
5.2.4.1 & TABLE J-IA IAW MIL-PRF-81705E (**ONLY IF APPLICABLE TO PART**)
2.) INDIVIDUALLY PACKAGED AND LABELED IAW MIL-STD-129P CH.4, REQUIRED ID MARKING EX:
PARAGRAPH 4.1 FIGURE 1 - MARKINGS SHALL COMPLY WITH PACK TYPE / MATERIALS AS
REFERENCED IN DOCUMENT. LABELS: IAW MIL-STD-129P W/ CHANGE 4, PARAGRAPH 4.1
IDENTIFICATION MARKINGS: BARCODING IS NOT REQUIRED. (PG.21).
2.A) VISIBLY MARK / LABEL ALL ELECTRONIC EQUIPMENT WITH "STORE INDOORS ONLY"
WARNING. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED, AND / OR LABELED WITH THE
REQUIRED FORMAT WILL BE RETUREND TO THE VENDOR FOR REPACKAGING.
END USE: AN/SPS-75 RADAR RECEIVER
FOR TECHNICAL QUESTIONS ONLY:
POC: RANDOLPH ARAGON
PH: 410-762-6149
EMAIL: RANDOLPH.E.ARAGON@USCG.MIL
ALL ITEMS REQUIRED DELIVERY DATE: 08/15/2025
If unable to meet required delivery date, please provide DD: ________
- NO SUBSTITUTIONS.
Are you able to meet packaging requirements? Yes ___ No ____
LINE ITEM 3
NSN: 5840 01-653-2552
DESCRIPTION: CONTROL, RADAR SET
MFG NAME: HENSOLDT SENSORS GMBH
PART_NBR: 54.2880.087.05
QUANTITY: 3 EA
UNIT PRICE: ______________________
TOTAL PRICE (Shipping must be included): ________________________
DESCRIPTIVE DATA:
NIIN: 01-653-2552
P/N: 54.2880.087.05
ITEM: RADAR SET CONTROL
MFR: HENSOLDT
CAGE: D1901
QTY PER HULL: 1
ESTIMATED LEAD TIME: 9
PACKAGING SPECS:
1.) MIL-STD-20731E - REFER TO METHOD 10. PACKAGING SHOULD BE APPROPRIATE TO PART
SIZE, WEIGHT, AND MUST WITHSTAND MULTIPLE WORLDWIDE SHIPMENTS IN VARIOUS SHIPPING CONDITIONS / CLIMATES. PART MUST BE APPROPRIATELY SECURED, AND CUSHIONED BY FOAM OR BUBBLE WRAP TO PREVENT EXCESSIVE MOVEMENT AND DAMAGE DURING SHIPPING.
1.A) ELECTROSTATIC DISCHARGE (ESD) ITEMS TO COMPLY WITH METHOD 41, PARAGRAPH 3.7;
5.2.4.1 & TABLE J-IA IAW MIL-PRF-81705E (**ONLY IF APPLICABLE TO PART**)
2.) INDIVIDUALLY PACKAGED AND LABELED IAW MIL-STD-129P CH.4, REQUIRED ID MARKING EX:
PARAGRAPH 4.1 FIGURE 1 - MARKINGS SHALL COMPLY WITH PACK TYPE / MATERIALS AS
REFERENCED IN DOCUMENT. LABELS: IAW MIL-STD-129P W/ CHANGE 4, PARAGRAPH 4.1
IDENTIFICATION MARKINGS: BARCODING IS NOT REQUIRED. (PG.21).
2.A) VISIBLY MARK / LABEL ALL ELECTRONIC EQUIPMENT WITH "STORE INDOORS ONLY"
WARNING. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED, AND / OR LABELED WITH THE
REQUIRED FORMAT WILL BE RETUREND TO THE VENDOR FOR REPACKAGING.
END USE: AN/SPS 75 RADAR
FOR TECHNICAL QUESTIONS ONLY:
POC: RANDOLPH ARAGON
PH: 410-762-6149
EMAIL: RANDOLPH.E.ARAGON@USCG.MIL
ALL ITEMS REQUIRED DELIVERY DATE: 05/15/2025
If unable to meet required delivery date, please provide DD: ________
- NO SUBSTITUTIONS.
Are you able to meet packaging requirements? Yes ___ No ____
** Total cost shall have delivery and any Freight charges to zip code 21226 included. **
** SHIPPING: FOB DESTINATION REQUIRED. **
SHIP TO:
USCG SURFACE FORCES LOGISTICS CENTER
2401 HAWKINS POINT ROAD
RECEIVING ROOM- BUILDING 88
BALTIMORE, MD 21226
Preparation For Delivery
All material must be shipped to U.S. Coast Guard Surface Forces Logistics Center, 2401 Hawkins Point Road, Receiving Room- BLDG 88, Baltimore, MD, 21226 for this Purchase Order. Material must be accompanied by an itemized packaging list securely attached to the outside of the shipment.
All packing lists shall cite the Purchase Order Number with the packaging in such a manner to ensure identification of the material provided.
Material shall be packed for shipment using Military Packaging, for examples in packaging please reference MIL-STD-2073-1E. Material must be packaged in such a manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment from the supply course to Surface Forces Logistics Center locations.
Packaging shall provide adequate protection for warehouse storage and shipments from the warehouse.
All Deliveries are to be made Monday through Friday between the hours of 8:00 a.m. EST to 1:00 p.m. EST.
Please make sure that any changes in Delivery Timeframes or tracking information get sent to gina.m.baran@uscg.mil
U.S. COAST GUARD APPROVED LABEL SHOULD HAVE THE FOLLOWING:
- NATIONAL STOCK NUMBER (NSN)
- ITEM NAME
- PART NUMBER
- PURCHASE ORDER NUMBER
- THE WORDS “COAST GUARD SFLC MATERIAL” CONDITION (A)
- QUANTITY AND UNIT OF ISSUE (I.E) (1-EA)
Invoicing In IPP
It is now a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov.
All invoices must contain the following information: CG contract number, vendor’s invoice number, vendor’s UEI, UEI & TINs number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON-PO IN IPP).
To submit an invoice, vendor must have access to www.ipp.gov. Additionally, a copy of the invoice must also be sent to the PO Issuing Office at: gina.m.baran@uscg.mil
