This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at (FAR 13), as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is (SPMYM324Q6050). This solicitation documents and incorporates provisions and clauses in effect through FAC 2024-05 May 22, 2024, and DFARS Change Notice 20240815. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this address: https://www.ecfr.gov and https://www.acquisition.gov/content/list-sections-affected and http://www.acq.osd.mil/dpap/dars/change_notices.html.
The FSC Code is (5305) and the NAICS code is (332722). The Small Business Standard is 600 employees. This requirement is being processed utilizing 100% Small Business Set-Aside.
Evaluation criteria is Lowest Price Technically Acceptable (LPTA). PPIRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104.
Offerors are required to submit descriptive literature to show how their quotation meets the required specifications. Failure to provide this information may result in your quotation being determined technically unacceptable.
The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:
***Please fill out 24Q6050 RFQ in the attachment section to be considered for award***
ITEM DESCRIPTION QTY U/I
0001 HEX HEAD CAP SCREW 20 EA
HEX HEAD CAP SCREW 0.625-11UNC-2A X 2.375
INCHES LONG, MIL-DTL-12221, TYPE-I. ALLOY STEEL
GRADE-5. ZINC PLATE IA W ASTM B633-23, TYPE-II, SC-2.
0002 DATA REQUIREMENTS FOR CLIN 0001 1 EA
A001 EXHIBIT A, SEQ A001
SEE EXHIBIT “A” SEQ A001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)
0003 DATA REQUIREMENTS FOR CLIN 0001 1 EA
A002 EXHIBIT A, SEQ A002
SEE EXHIBIT “A” SEQ A002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)
0004 HEX HEAD CAP SCREW 20 EA
SAME AS ITEM 0001
0005 DATA REQUIREMENTS FOR CLIN 0004 1 EA
B001 EXHIBIT B, SEQ B001
SEE EXHIBIT “B” SEQ B001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)
0006 DATA REQUIREMENTS FOR CLIN 0004 1 EA
B002 EXHIBIT B, SEQ B002
SEE EXHIBIT “B” SEQ B002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)
0007 HEX HEAD CAP SCREW 20 EA
SAME AS ITEM 0001
0008 DATA REQUIREMENTS FOR CLIN 0007 1 EA
C001 EXHIBIT C, SEQ C001
SEE EXHIBIT “C” SEQ C001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)
0009 DATA REQUIREMENTS FOR CLIN 0007 1 EA
C002 EXHIBIT C, SEQ C002
SEE EXHIBIT “C” SEQ C002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)
0010 HEX HEAD CAP SCREW 20 EA
SAME AS ITEM 0001
0011 DATA REQUIREMENTS FOR CLIN 0010 1 EA
D001 EXHIBIT D, SEQ D001
SEE EXHIBIT “D” SEQ D001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)
0012 DATA REQUIREMENTS FOR CLIN 0010 1 EA
D002 EXHIBIT D, SEQ D002
SEE EXHIBIT “D” SEQ D002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)
0013 HEX HEAD CAP SCREW 16 EA
HEX HEAD CAP SCREW l.250-7UNC-2A X 4.500
(+/- 1/16 IN.) INCHES LONG. MIL-DTL-1222J, TYPE-I.
MATERIAL IS ALLOY STEEL GRADE-5.
0014 DATA REQUIREMENTS FOR CLIN 0013 1 EA
E001 EXHIBIT E, SEQ E001
SEE EXHIBIT “E” SEQ E001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)
0015 DATA REQUIREMENTS FOR CLIN 0013 1 EA
E002 EXHIBIT E, SEQ E002
SEE EXHIBIT “E” SEQ E002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)
0016 FLAT HEAD SLF LKG MACHINE SCREW 06 EA
FLAT HEAD 82 DEGREE SELF-LOCKING MACHINE SCREW,
0.500-13UNC-2A X 2.000 IN LONG. MFR. IA W FF-S-92D TYPE III
(CROSS RECESS, DESIGN I) STYLE 2C (FLAT HEAD 82 DEGREE).
MATERIAL IS CADIUM PLATED STEEL. SELF-LOCKING IA W
MIL-DTL-18240F AMEND 1 TYPE "LOR P". MARKINGS OF A
MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR
DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON
THE HEAD OF THE FAS TENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY.
0017 DATA REQUIREMENTS FOR CLIN 0016 1 EA
F001 EXHIBIT F, SEQ F001
SEE EXHIBIT “F” SEQ F001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)
0018 DATA REQUIREMENTS FOR CLIN 0016 1 EA
F002 EXHIBIT F, SEQ F002
SEE EXHIBIT “F” SEQ F002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)
0019 HEX HEAD SLF-LKG CAP SCREW 04 EA
HEX HEAD SELF-LOCKING CAP SCREW
0.500-13UNC-3A X 7.500 INCHES LONG. MIL-DTL-1222J,
TYPE-I. ALLOY STEEL GRADE-5. ZINC PLATE IAW ASTM B633-23,
TYPE-II, SC-2. SELF-LOCKING IAW MIL-DTL-18240F AMEND 1
TYPE "ANY". MARKINGS OF A MINIMUM (6) DOTS
(APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED
(APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD
OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY.
0020 DATA REQUIREMENTS FOR CLIN 0019 1 EA
G001 EXHIBIT G, SEQ G001
SEE EXHIBIT “G” SEQ G001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)
0021 DATA REQUIREMENTS FOR CLIN 0019 1 EA
G002 EXHIBIT G, SEQ G002
SEE EXHIBIT “G” SEQ G002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)
0022 HEX HEAD SLF LKG CAP SCREW 08 EA
HEX HEAD SELF-LOCKING CAP SCREW
0.500-13UNC-3A X 1.750 INCHES LONG. MIL-DTL-1222J,
TYPE-I. ALLOY STEEL GRADE-5. ZINC PLATE IAW
ASTM B633-23, TYPE-II, SC-2. SELF-LOCKING IAW MIL-DTL-18240F
AMEND 1 TYPE "ANY". MARKINGS OF A MINIMUM (6) DOTS
(APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED
(APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD
OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY.
0023 DATA REQUIREMENTS FOR CLIN 0022 1 EA
H001 EXHIBIT H, SEQ H001
SEE EXHIBIT “H” SEQ H001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)
0024 DATA REQUIREMENTS FOR CLIN 0022 1 EA
H002 EXHIBIT H, SEQ H002
SEE EXHIBIT “H” SEQ H002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)
0025 HEX HEAD CAP SCREW 10 EA
HEX HEAD CAP SCREW, 0.500-13UNC-2A X 3.250
INCHES LONG. MIL-DTL-1222J, TYPE-I.
NICU, QQ-N-281D AMEND 2, CLASS A.
0026 DATA REQUIREMENTS FOR CLIN 0025 1 EA
J001 EXHIBIT J, SEQ J001
SEE EXHIBIT “J” SEQ J001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)
0027 DATA REQUIREMENTS FOR CLIN 0025 1 EA
J002 EXHIBIT J, SEQ J002
SEE EXHIBIT “J” SEQ J002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)
0028 HEX HEAD CAP SCREW 25 EA
HEX HEAD CAP SCREW, 0.500-13UNC-3A X 3.250
INCHES LON., MIL-DTL-1222J, TYPE-I. ALLOY STEEL
GRADE-5. ZINC PLATE IAW ASTM B633-23, TYPE-II, SC-2.
0029 DATA REQUIREMENTS FOR CLIN 0028 1 EA
K001 EXHIBIT K, SEQ K001
SEE EXHIBIT “K” SEQ K001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)
0030 DATA REQUIREMENTS FOR CLIN 0028 1 EA
K002 EXHIBIT K, SEQ K002
SEE EXHIBIT “K” SEQ K002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)
NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 52.204-24, 52.204-26, 252.204-7016, AND 252.204-7019 AND INCLUDE THE COMPLETED PROVISIONS WITH
THEIR OFFER.
A small business joint venture offeror must submit, with its offer, the representation required in paragraph (c) of FAR solicitation provision 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business Program Representations, in accordance with 52.204-8(d) and 52.212-3(b) for the following categories:
(A) Small business;
(B) Service-disabled veteran-owned small business;
(C) Women-owned small business (WOSB) under the WOSB Program;
(D) Economically disadvantaged women-owned small business under the WOSB Program; or
(E) Historically underutilized business zone small business.
FAR CLAUSES AND PROVISIONS
52.204-7, System for Award Maintenance
52.204-9, Personal Identity Verification of Contractor Personnel
52.204-13, SAM Maintenance
52.204-19, Incorporation by Reference of Representations and Certifications
52.204-24* See Attachment for this provision
52.204-26* See Attachment for this provision
52.204-29 FASCSA Representation* See Attachment for this provision
52.211-14, Notice of Priority Rating
52.211-15, Defense Priority And Allocation Requirements
52.211-17, Delivery of Excess Quantities
52.212-1, Instructions to Offerors - Commercial Items;
52.212-3, Offeror Reps and Certs
52.212-4, Contract Terms and Conditions – Commercial Items
52.219-1 Alt 1 Small Business Program Representations
52.222-22, Previous Contracts & Compliance Reports
52.222-25, Affirmative Action Compliance
52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation
52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relation to Iran-Reps and Certs
52.232-39, Unenforceability of Unauthorized Obligations
52.233-2 Service of Protest
52.242-13 Bankruptcy
52.242-15 Stop Work Order
52.243-1, Changes Fixed Price
52.246-1, Contractor Inspection Requirements
52.247-34, F.O.B-Destination
52.252-1 Solicitation Provisions Incorporated by Reference
52.252-2 Clauses Incorporated by Reference
52.253-1, Computer Generated Forms
52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including all base terms, conditions, and clauses outlined within the clause, plus the following clauses that have been specifically selected (checked off within the clause) for this procurement:
52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements
52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities
52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment
52.209-10, Prohibition on Contracting with Inverted Domestic Corporations
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
52.233-3, Protest After Award
52.233-4, Applicable Law for Breach of Contract Claim
52.204-10
Reporting Executive Compensation
52.204-27
Prohibition on a ByteDance Covered Application
52.204-30
FASCSA Federal Acquisition Supply Chain Security Act Orders-Prohibition
52.209-6
Protecting the Government's Interest
52.219-6
Notice of Total Small Business Set-Aside
52.219-28
Post-Award Small Business Program Representation
52.222-3
Convict Labor
52.222-19
Child Labor
52.222-21
Prohibition of Segregated Facilities
52.222-26
Equal Opportunity
52.222-36
Equal Opportunity for Workers with Disabilities
52.223-11
Ozone Depleting Substances
52.223-18
Encouraging Contractors to Ban Text Messaging While Driving
52.225-1
Buy American-Supplies
52.225-13
Restriction on Certain Foreign Purchases
52.232-33
Payment by EFT-SAM
52.232-36
Payment by Third Party
52.247-64
Preference for Privately Owned US-Flag Commercial Vessels
DFARS CLAUSES AND PROVISIONS
252.203-7000 Requirements Relating to Compensation of Former DoD Officials,
252.203-7002, Requirement to Inform Employees of Whistleblower Rights
252.203-7005 Representation Relating to Compensation of Former DoD Officials
252.204-7003. Control of Government Personnel Work Product
252.204-7004 Antiterrorism Awareness Training for Contractors.
252.204-7008 Compliance With Safeguarding Covered Defense Information Controls
252.204-7012, Safeguarding of Unclassified Controlled Technical Information Deviation 2016 O0001)
252.204-7015, Disclosure of Information to Litigation Support Contractors
252.204-7016, * See Attachment for this provision.
252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation
252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
252.204-7019, *See Attachment for this provision.
252.204-7020, NIST SP 800-171 DoD Assessment Requirements
252.204-7024 Notice on the Use of the Supplier Performance Risk System
252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability
252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations.
252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.
252.223-7008 Prohibition of Hexavalent Chromium
252.225-7001 Buy American and Balance of Payments Program
252.225-7002 Qualifying Country Sources as Subcontractors
252.225-7048, Export Controlled Items
252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation
252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region
252.231-7000, Supplemental Cost Principles.
252.232-7003, Electronic Submission of Payment Requests
252.232-7006, Wide Area Workflow Payment Instructions
252.232-7010, Levies on Contract Payments
252.243-7001, Pricing of Contract Modifications
252.243-7002, Requests for Equitable Adjustment
252.244-7000, Subcontracts for Commercial Items
252.247-7023, Transportation of Supplies By Sea
Note: Vendor shall list the country of origin for each line item.
DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text)
52.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution
DLA PROCUREMENT NOTES (See Attachment for Full Text)
C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)
C03 Contractor Retention of Supply Chain Traceability Documentation (MAR 2023)
C04 Unused Former Government Surplus Property (DEC 2016)
C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017)
C20 Vendor Shipment Module (VSM) (AUG 2017)
E05 Product Verification Testing (JUN 2018)
G01 Additional Wide Area Workflow (WAWF) Information (AUG 2017)
H10 Awardee Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (FEB 2020)
L06 Agency Protests (DEC 2016)
L31 Additive Manufacturing (JUN 2018)
M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)
LOCAL CLAUSES (See Attachment for Full Text):
YM3 A1: Additional Information
YM3 C500: Mercury Control (Supplies)
YM3 C501: Correction of Certifications
YM3 C524: Controlled Industrial Material
YM3 C528: Specification Changes
YM3 D2.2: Marking of Shipments
YM3 D4: Preparation for Delivery
YM3 D8: Prohibited Packing Materials
YM3 E2: Inspection and Acceptance (Destination)
YM3 E504: Notice of Constructive Acceptance Period
YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard
YM3 H500: Special Provisions for Threaded Products
YM3 M8: Single Award for All Items
Quoters are reminded to include a completed copy of 52.212-3 and it’s ALT I if not updated in SAM.
This announcement will close (8/30/2024). The Point of Contact for this solicitation is Jannell Moriarty, who can be reached at jannell.moriarty@dla.mil. All responsible sources may submit a quote which shall be considered by the agency.
System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/.
If not the actual manufacturer – Manufacturer’s Name, Location, and Business Size must be provided.
Please submit quotations via email at jannell.moriarty@dla.mil.
Quotes also to: DLA-KME-QUOTATIONS@DLA.MIL
All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.
******* END OF COMBINED SYNOPSIS/SOLICITATION ********
