SAM.GOV Sources Sought
Class Code: Multiple, See table.
NAICS Code: Multiple, See table.
Subject: Sources Sought, Sole Sourced to Raytheon Multiple NSNs, SPRRA2-25-R-0005
Set Aside Code: N/A (Sole Sourced)
PRON Number: Multiple, See table.
Response Date: 3 Days
Place of Performance: TBD
Description: THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUEST FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE.
This Sources Sought is in support of Market Research being conducted by the Defense Logistics Agency to identify potential manufacturing/supply sources, and if future efforts can be competitive or Set Aside for Small Business.
Table 1:
PRON, NSN, PART NUMBER, NOUN, NAICS, # OF EMPLOYEES, AMRC Code, ARMS EXPORT CONTROL ACT APPLIES
- D14H0700D1 5998-01-105-2951 11455798 CIRCUIT CARD ASSEMBLY 334412 750 3N YES
- D14H0681D1 5998-01-106-8715 11457515 CIRCUIT CARD ASSEMBLY 334412 750 3N YES
- D14F0248D1 5998-01-235-1669 11454842 CIRCUIT CARD ASSEMBLY 334412 750 3B NO
- D14H0694D1 5998-01-646-0875 13646476 CIRCUIT CARD ASSEMBLY 334412 750 3N YES
- D14H0686D1 5998-01-715-9883 13657774-108 CIRCUIT CARD ASSEMBLY 334412 750 4C YES
- D14H0688D1 6130-01-684-7081 11474471-3 POWER SUPPLY 335931 600 4C YES
- D14F0251D1 6150-01-453-7881 13739866-1 CABLE ASSEMBLY SPEC 335311 800 3C YES
This Sources Sought is to notify companies that the Defense Logistics Agency, Redstone Arsenal, Alabama, is seeking qualified sources for the acquisition of MULTIPLE ITEMS in support of the Patriot Weapons System. The AMSC codes can be referenced on the table. As a result, this acquisition is currently being procured under Federal Acquisition Regulation (FAR) 6.302-l(a)(2) having only a limited number of responsible sources. The Government is interested in all businesses to include 8(a), small business and small disadvantaged business, ServiceDisabled Veteran-Owned, Hubzone, and Women-Owned small business concerns.
All offerors must meet prequalification requirements in order to be eligible for award. The U.S. Army Combat Capabilities Development Command Aviation & Missile Center’s (AvMc DEVCOM) System Readiness Directorate (SRD), Sustainment Division (SD) is the engineering source authority for source approvals. Firms that recognize and can produce the required item described above are encouraged to identify themselves. Firms are encouraged to seek source approval in order to compete for future efforts by emailing inquiries to: usarmy.redstone.devcom-avmc.mbx.amr-ss-sar@mail.mil.
The closing date annotated is an estimated date and may be adjusted dependent upon the date of release for solicitation; however, the solicitation will not close prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed through their respective embassies. The contractor shall be capable of successfully performing and complying with any and all special requirements in accordance with the terms and conditions set forth in the solicitation annotated above, at the unit prices established at time of a contract award. The contractor will be responsible for recurring and nonrecurring engineering services associated with becoming a qualified source.
The contractor will also be responsible for all aspects of the manufacturing/production process, including but not limited to - supply chain management, logistics, forecasting of parts, long-lead parts procurement, material forecasting, obsolescence issues and final delivery of assets as well as any and all additional costs incurred resulting from contract performance.
DISCLAIMER: THIS SOURCES SOUGHT IS ISSUED SOLELY FOR INFORMATIONAL AND PLANNING PURPOSES. IT DOES NOT CONSTITUTE A SOLICITATION (REQUEST FOR PROPOSAL OR REQUEST FOR QUOTATION) OR A PROMISE TO ISSUE A SOLICITATION IN THE FUTURE AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.
THIS ACQUISITION MAY CONTAIN TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, USC., SEC 2751 ET SEQ) OR THE EXPORT ADMINISTRATION ACT (TITLE 50, USC., APP 2401-2402) EXECUTIVE ORDER 12470. ARMS EXPORT INFORMATION CANNOT BE RELEASED OUTSIDE THE UNTIED STATES WITHOUT PRIOR APPROVAL OF THE GOVERNMENT.
THIS ACQUISITION MAY CONTAIN TECHNICAL DATA DOCUMENTATION THAT IS CLASSIFIED
AMSC Code:
3B Acquire, for the second or subsequent time, directly from the actual manufacturer. This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application.
3C Acquire, for the second or subsequent time, directly from the actual manufacturer. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s).
3N Acquire, for the second or subsequent time, directly from the actual manufacturer. Manufacture of this part requires special test and/or inspection facilities to determine and maintain ultra-precision quality for its function or system integrity. Substantiation and inspection of the precision or quality cannot be accomplished without such specialized test or inspection facilities.
4C Acquire, for the first time, directly from the actual manufacturer. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity’s procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.
