This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures found at FAR 13, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. Paper copies of this solicitation will not be available. This combined synopsis/solicitation SHALL be posted on SAM.gov. The Request for Quotation (RFQ) number is SPMYM325Q3104x. This solicitation documents and incorporates provisions and clauses in effect through FAC 2025-01 and DFARS Change Notice 2024-1010. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.ecfr.gov and https://www.acquisition.gov/content/list-sections-affected and http://www.acq.osd.mil/dpap/dars/change_notices.html.
The FSC Code is 5935 and the NAICS code is 335931 and the Small Business Standard is 600. This is a 100% Small Business Set Aside solicitation.
Evaluation criteria is Lowest Price Technically Acceptable (LPTA). SPRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104.
This requirement is a part numbered item, due to Navy Drawing requirements. The drawing is not required for understanding of this requirement. Quotations received that represent a different item will not be considered for award.
Offerors are required to submit descriptive literature to show how their quotation meets the required specifications. Failure to provide this information may result in your quotation being determined technically unacceptable.
The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:
CLIN 0001: HEADER, See RFQ for Details.
CLIN 0002: HEADER, See RFQ for Details.
CLIN 0003: HEADER, See RFQ for Details.
NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 52.204-24,
52.204-26, 252.204-7016, AND 252.204-7019 AND INCLUDE THE COMPLETED PROVISIONS WITH THEIR OFFER.
FAR CLAUSES AND PROVISIONS:
Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. The following FAR provisions (P) and clauses are applicable to this procurement:
52.204-7, System for Award Maintenance
52.204-13, SAM Maintenance
52.204-16 Commercial and Government Entity Code Reporting.
52.204-17 Ownership or Control of Offeror.
52.204-18 Commercial and Government Entity Code Maintenance.
52.204-19, Incorporation by Reference of Representations and Certifications
52.204-24* See Attachment for this provision
52.204-26* See Attachment for this provision
52.204-29 FASCSA Representation* See Attachment for this provision
52.211-14, Notice of Priority Rating
52.211-15, Defense Priority And Allocation Requirements
52.211-17, Delivery of Excess Quantities
52.212-1, Instructions to Offerors - Commercial Items;
52.212-3 Alt 1, Offeror Reps and Certs
52.212-4, Contract Terms and Conditions – Commercial Items
52.219-1 Alt 1 Small Business Program Representations
52.222-22, Previous Contracts & Compliance Reports
52.222-25, Affirmative Action Compliance
52.223-22 Public Disclosure of Greenhouse Gas Emissions -Representation
52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relation to Iran-Reps and Certs
52.232-39, Unenforceability of Unauthorized Obligations
52.233-2 Service of Protest
52.242-13 Bankruptcy
52.242-15 Stop Work Order
52.243-1, Changes Fixed Price
52.246-1, Contractor Inspection Requirements
52.247-34, F.O.B-Destination
52.252-1 Solicitation Provisions Incorporated by Reference
52.252-2 Clauses Incorporated by Reference
52.253-1, Computer Generated Forms
52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including all base terms, conditions, and clauses outlined within the clause, plus the following clauses that have been specifically selected (checked off within the clause) for this procurement:
52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements
52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities
52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment
52.209-10, Prohibition on Contracting with Inverted Domestic Corporations
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
52.233-3, Protest After Award
52.233-4, Applicable Law for Breach of Contract Claim
52.204-10 Reporting Executive Compensation
52.204-27 Prohibition on a ByteDance Covered Application
52.204-30 FASCSA Federal Acquisition Supply Chain Security Act Orders-Prohibition
52.219-6 Notice of Total Small Business Set-Aside
52.219-28 Post-Award Small Business Program Representation
52.222-3 Convict Labor
52.222-19 Child Labor
52.222-21 Prohibition of Segregated Facilities
52.222-26 Equal Opportunity
52.222-36 Equal Opportunity for Workers with Disabilities
52.222-50 Combating Trafficking in Persons
52.223-11 Ozone Depleting Substances
52.223-23 Sustainable Products and Services
52.225-1 Buy American-Supplies
52.225-13 Restriction on Certain Foreign Purchases
52.226-8 Encouraging Contractors to Ban Text Messaging While Driving
52.232-33 Payment by EFT-SAM
52.232-36 Payment by Third Party
DFARS CLAUSES AND PROVISIONS
252.203-7000 Requirements Relating to Compensation of Former DoD Officials,
252.203-7002, Requirement to Inform Employees of Whistleblower Rights
252.203-7005 Representation Relating to Compensation of Former DoD Officials
252.204-7003. Control of Government Personnel Work Product
252.204-7004 Antiterrorism Awareness Training for Contractors.
252.204-7008 Compliance With Safeguarding Covered Defense Information Controls
252.204-7009 Limitations on the Use or Disclosure of Third- Party Contractor Reported Cyber Incident Information
252.204-7015, Disclosure of Information to Litigation Support Contractors
252.204-7016, * See Attachment for this provision.
252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation
252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
252.204-7024 Notice on the Use of the Supplier Performance Risk System
252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability
252.211-7003, Item Unique Identification and Valuation
Para (c)(i): Exempted from IUID by Military Service Customer. Supplier should check IUID exemption box in WAWF.
252.223-7008 Prohibition of Hexavalent Chromium
252.225-7001 Buy American and Balance of Payments Program
252.225-7002 Qualifying Country Sources as Subcontractors
252.225-7048, Export Controlled Items
252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation
252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region
252.231-7000, Supplemental Cost Principles.
252.232-7003, Electronic Submission of Payment Requests
252.232-7006, Wide Area Workflow Payment Instructions
252.232-7010, Levies on Contract Payments
252.243-7001, Pricing of Contract Modifications
252.244-7000, Subcontracts for Commercial Items
252.246-7007, Contractor Counterfeit Electronic Part Detection and Avoidance System
252.246-7008, Sources of Electronic Parts
252.247-7023, Transportation of Supplies By Sea
Note: Vendor shall list the country of origin for each line item.
DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text)
5452.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution
DLA PROCUREMENT NOTES (See Attachment for Full Text)
C01 Superseded Part Numbered Items (SEP 2016)
C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)
C03 Contractor Retention of Supply Chain Traceability Documentation (MAR 2023)
C04 Unused Former Government Surplus Property (SEP 2021)
C14 Repackaging or Relabeling to Correct Deficiencies (MAY 2020)
C20 Vendor Shipment Module (VSM) (NOV 2022)
E05 Product Verification Testing (MAY 2020)
H01 Qualified Products List (QPL) for Federal Supply Class (FSC) 5935 Connector Assemblies and Contacts
H10 Exceptions to Requirement for All Sources of Supply to Have DLA Controlling Authority Approval to Access DLA Controlled Technical Data or Information for Contract Performance (MAY 2024).
L04 Offers for Part Numbered Items (SEP 2016)
L06 Agency Protests (DEC 2016)
L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (JUN 2020, MAR 2023)
L31 Additive Manufacturing (JUN 2018)
M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)
M06 Evaluation of Offers for Part Numbered Items (SEP 2016)
LOCAL CLAUSES (See Attachment for Full Text):
YM3 A1: Additional Information
YM3 C500: Mercury Control (Supplies)
YM3 C528: Specification Changes
YM3 D2.2: Marking of Shipments
YM3 D4: Preparation for Delivery (Commercially Packaged Items)
YM3 D8: Prohibited Packing Materials
YM3 E2: Inspection and Acceptance (Destination)
YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard
YM3 M8: Single Award for All Items
Quoters are reminded to include a completed copy of 52.212-3 and it’s ALT I if not updated in SAM.
This announcement will close at 03:00 PM EST local time on 20 November 2024. POC for this solicitation is Emily Kritzman who can be reached by email (below).
METHOD OF SUBMISSION: Offers shall be emailed.
Please submit quotations via email at Emily.Kritzman@dla.mil
Quotes also to: DLA-KME-QUOTATIONS@DLA.MIL
All responsible sources may submit a quote which shall be considered by the agency.
System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/.
If not the actual manufacturer – Manufacturer’s Name, Location, and Business Size must be provided.
All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, Paypal, etc.). Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.
******* END OF COMBINED SYNOPSIS/SOLICITATION ********
