THIS IS TO BE AWARDED BASED OFF LOWEST PRICE TECHNICALLY ACCEPTABLE AND PAST PREFORMANCE
POP: 10-APR to 15-JUN-2025
1
General Requirements
1. SCOPE
1.1 Intent. This standard specification invokes general requirements for conducting vessel repairs
performed by commercial contractors at a Coast Guard facility for Coast Guard vessels.
2. REFERENCES
COAST GUARD DRAWINGS
None.
COAST GUARD PUBLICATIONS
Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022,
General Requirements
Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022,
General Welding Requirements
OTHER REFERENCES
None
3. REQUIREMENTS
3.1 General. The Contractor must conform to all requirements specified in SFLC Std Spec 0000 and in
this item, as applicable, during the performance of this availability. The requirements of this WI apply to
all work under the scope of this contract, whether explicitly stated in all following work items or not, and
to all other work subsequently authorized by changes, modifications, or extensions to the contract.
3.2 Hot Work. The cutter will be moored at a fuel pier. Hot Work onboard or onsite will not be
authorized. Any required hot work must be performed off-site and comply with the requirements of SFLC
Std Spec 0740.
3.3 Pier Limitations. The cutter will be moored at a fuel pier with weight limitations of 13,000 pounds.
The Contractor must advise the Contracting Officer (KO) and/or Contracting Officer’s Representative
(COR) if they will exceed this limitation when performing vessel repairs.
3.4 Materials. The Contractor must obtain all the materials required to complete this job with the
exception of the Government-furnished Property shown in Paragraph 1.2 of Work Item 1.
3.5 Period of Performance. The period of performance for this work is 10 April 2025 through 15 June
2025.
3.6 Location. The Contractor must perform the work while the USCGC ALEX HALEY is alongside the
pier on U.S. Coast Guard Base Kodiak, 5th St, Kodiak Station, AK 99619.
