Specifications include, but are not limited to: a) It is the contractor’s responsibility to provide all tools and equipment needed to perform the job outlined. b) It is the contractor’s responsibility to provide all of the company vehicles with parking passes. UNLV Facilities Management will not be responsible for any parking tickets received while on campus. c) Contractor is responsible to provide all break facilities and maintain them in a clean and professional manner. d) It is the contractor’s responsibility to call the official agency that has jurisdiction over the work that is being performed for all necessary inspections that are required. The contractor will furnish to the owner’s representative a copy of all inspection reports in a timely manner. e) The contractor is responsible to file for all necessary permits that may be required and the contractor will provide a copy of the issued permit to the owner’s representative. f) This project consists of work in RM 1421 on the west side of Greenspun (GUA). All work will be in accordance with the plans labeled “Greenspun Building Heating System Upgrade” and stamped/approved by SPWD. Work to be performed in outlined in said plans, starting with General Notes found on M0.01. g) The mechanical contractor performing the work must have at least one (1) qualified supervisor and journeyman foreman on site at all times while work is taking place. h) Project coordination will be required between the contractor and UNLV. Shutdowns may be expected, if it does become necessary. The work and durations must be agreed in advance and may be required to occur during off hours or weekends. i) Properly protect existing furnishings, lights, equipment, etc. If damage occurs during the construction, please contact UNLV representative immediately.
