Specifications include, but are not limited to: A. Remove and replace deteriorating gutter, down spouts, and approximately 3’ of damaged roofing around the perimeter of the building. A roof scan was conducted and is attached for you use. (Section #5, Item N.) B. Expose the plywood deck and replace plywood where dry rot is present. This is to include fascia, shiplap, rafters, lookouts, freeze blocks, slats, etc. All woodwork is to be primed and painted. C. Clean entire roof of debris, clean out all gutters and downspouts and ensure all mold growth is properly removed. D. Once flat roof is cleaned, apply one layer of Perma-Dri or equal rubber roof patch to the entire flat roof area that was repaired feathering into existing roofing material. E. Contractor is solely responsible for all measurements. F. Ensure roof slope to drains by building up roof deck if applicable. G. Properly reinforce all internal drains, as needed, to promote proper slope and drainage. H. Copings, counter flashing, and other metal work shall be fastened to resist wind uplift and prevent buckling. Metal should be sealed to prevent moisture infiltration. I. Product delivery, storage, and handling: deliver materials to the job site in original, unopened containers, with the manufacturer's name, brand name and installation instructions. J. Job site and premises will be kept clean, and work will be conducted in a manner least disruptive to site occupants.
