Specifications include, but are not limited to: 1. QUANITY\TYPE One (1) current year and production chipper body with hoist for the City of Green Bay Parks Department. To be mounted on a 33,000 lb. GVWR single axle conventional cab truck chassis (purchased separately).The chassis cab to axle will be approximately one hundred thirty-eight (138”) inches. 2. BODY AND DIMENSIONS • Forestry body to fit one hundred twenty-six (126”) inch dual rear wheel. chipper box specifications for a sixteen (16’) foot box. • One hundred ninety-two (192”) inches long OD. • Ninety – six (96”) inches wide OD. To be free of all obstructions no pole saw box. • Eighty-four (84”) inches high (with a total inside height of seventy-two (72”) inches from floor to roof top). TWENTY-EIGHT (28) YARD CHIP CAPACITY. 3. BODY Shall be mounted, undercoated, chemically degreased, cold tar epoxy coating inside chip box, primed and painted to match cab or City of Green Bay’s specific color. State Paint Warranty:_____________________________________________ Shall come equipped with stainless steel hinge pins. Chipper air exhaust vents 4. BODY,ROOF AND FLOOR MATERIAL All A-40 galvannealed (Zinc coated, resists rust) • Sides and Front: Shall be twelve (12ga) Galvanneal smooth. • Top/Roof Panel shall be fourteen (14ga) plate Galvanneale roof panel shall be reinforced with roof bow bracing. • Floor: Ten (10) Gauge plate shall be supported by 3” structural channel cross sills and six (6”) inch minimum structural long sills. • 3/16” floor option in lieu of 10 gauge floor. 5. SUPPORT • Rear vertical support: structural square tubing. • Cross members three (3”) inch structural channel. • Rear horizontal support: 4”x2”x1/4” rectangular tubing. • Vertical formed bracing 24” on center front to rear and floor to roof. • Horizontal bracing 16” and 32” from roof down.
