Specifications include, but are not limited to: Security System Installation A. Install security alarm system in accordance with the National Fire Protection Association – (NFPA) 72, latest edition adopted by the State of California. B. Contractor will install six (6) Alarm Panels at each entrance to building. C. Contractor will install two (2) interior motion sensors in various location inside the office as identified during the bid walk. D. Contractor to install twenty-two (22) motion sensors on windows (1 per window) including the scale head. E. Contractor to install eight (8) exterior motion beam sensors to cover each bay door as identified during the bid walk (entrances and exits). F. Document and provide a list of the make, model and serial number of security and fire alarm equipment to Facilities Analyst. G. Contractor shall not lock-out system and system shall not be proprietary.; Alarm Monitoring A. Provide 24-hour monitoring of security alarm system through Underwriter Laboratory (UL) listed central monitoring station. B. Maintain UL certification of security alarm system in accordance with the NFPA 72, latest edition adopted by the State of California. C. Replace system batteries annually (cost to be included in monthly service fee). D. Document and provide a list of the make, model and serial number of security alarm equipment to Headquarters’ Facilities Analyst. E. Provide annual testing of the security alarm system, including all devices. Test results to be sent to the on-site Facilities Coordinator as well as Coastal Division Analyst, Headquarters’ Facilities Analyst at 601 North 7th Street, Building B, Sacramento, CA 95811. F. Annually check all sensors and battery back-up. G. Contractor shall not lock-out system.
