Specifications include, but are not limited to: FASTENERS 1) Bolts of various type and grades a. SAE Grade 1 through SAE Grade 8 b. Types including Hex head, cap screw, socket head cap screw, machine bolts, lag bolts, eye bolts, wedge anchor bolts, carriage bolts, and others. c. Course and fine thread d. Various materials including Hastelloy, Inconel, Monel and various stainless steel grades e. Various finishes including heat treated, galvanized/zinc coated, PTFE f. Metric fasteners shall also be available 2) Other fastening components to include washers, lock washers, retaining rings, pins and studs, Tbolts, concrete anchors, wood screws, wing nuts, thread inserts, epoxy anchors, machine screws, set screws, concrete screws, threaded rod and other fasteners and components. HARDWARE 1) Industrial hardware to include but not limited to: Brackets and Supports, Draw Bolts, ,Expansion Plugs, Gaskets, Grommets & Eyelets, Handles, Handwheels, Hinges, Hook & Loop Products (Velcro, Teccro, etc.), Joint Connector Bolts & Draw Bolts, Knobs & Star Grips, Latches & Catches, Machine Mounts, Casters, Leg Levelers, Nails, Protective Caps & Plugs, Push-on Bolt Retainers, Push-on Hat Retainers, Axle Cap Nuts, Top Hat Nuts, Push-on Retainers (Pushnuts, Press Nuts, etc.),Snap Fasteners (Snap Studs, Snap Caps, etc.), Compression Springs, Tension / Extension Springs, Torsion Springs, Staples Storage Bins, Strut Systems (Channels, Clamps, Hangers, Nuts, etc.), Vibration Mounts, Shock Absorbing Mounts, Rubber Bumpers and other industrial parts and components.
