Specifications include, but are not limited to: Specifications for the requested equipment: 2.3.1.The testing unit shall have the capability to test EV Meters that meet the technical requirements and parameters as outlined in NIST HB 44 Electric Vehicle Fueling Systems Code. 2.3.2.The following or similar specifications apply to the testing unit: 2.3.3.AC VOLTAGE: (60V to 650v), 0.04% of reading (3 Phase) 2.3.4. AC CURRENT: (0.5A to 80A), 0.04% of reading (3 Phase) TTC ACTIVE 2.3.5.ENERGY: 0.08% of reading 2.3.6.DC VOLTAGE: (60V to 1000V), 0.05% of reading 2.3.7.DC CURRENT: (5.0A to 200A), 0.05% of reading 2.3.8.DC ACTIVE 2.3.9.ENERGY: 0.1% of reading 2.3.10. OPERATING 2.3.11. TEMPERATURE: -20°C to 50°C (-4°F to 122°F) 2.3.12. STORAGE 2.3.13. TEMPERATURE: -22°C to 60°C (-22°F to 140°F) 2.3.14. DIMENSIONS: 21.2” x 16” x 10.6” (53.8 x 40.6 x 26.9 cm) 2.3.15. WEIGHT: Approx. 45 lbs. (configuration dependent) 2.3.16. DUO Single Phase AC 250V, 80A DC 1000V, 200A 2.3.17. Shall include a Tesla Connector 2.3.18. Shall include ChadeMo Connector; The following or similar specifications apply to the auxiliary unit used to dispense heat: 2.4.1.VOLTAGE: 28A at 120V | 50A at 208V | 58A at 240V 2.4.2.| 28A at 480V 2.4.3.OPERATING 2.4.4.TEMPERATURE: -20°C to 50°C (-4°F to 122°F); STORAGE 2.5.1.TEMPERATURE: -22°C to 60°C (-22°F to 140°F) 2.5.2.DIMENSIONS: 16.9” x 16.3” x 26” (42.9 x 41.4 x 66 cm) 2.5.3.WEIGHT: Approx. 64 lbs.
