Specifications include, but are not limited to: Remove old countertop and cabinets, dispose of properly. B. Remove 4” cove base to finish walls and install new cove base, dispose of properly. C. Remove sheet rock off both walls that will have ballistic panels installed on them. D. Frame partition for new 3.0 ballistic door and frame ballistic glass transaction window, keep frame down approximately 6 inches below ceiling for air flow. Open ceiling and secure partition framing to roof framing. E. Install new ADA accessible cabinets and countertop at secure side. Custom fabricated to WI/AWI Woodwork Standards. Frameless, Type 1, flush overlay drawers with shelves and seismic anchorage. NEMA LD3 plastic laminate grade: HGS or HGL countertop, VGS exposed vertical surfaces. Laminate selected by Area Commander from full range of patterns and colors. 30” countertop. Satin anodized aluminum wire pulls. F. Install electronic latch release for ballistic door, with remote and attach wired release button under countertop. Conceal wiring. Keypad access at public side. (if needed). G. Install duplex outlet and duplex data receptacles in partition at knee space. Provide wire management grommet at countertop