Specifications include, but are not limited to: This specification describes the in-line fuse holder to be used for street lighting or parking lot lighting. B. Materials B.1. In-line fuse holder is to be single pole, with insulating boots molded from thermoplastics resistant to corrosive environments. The color is to be in black. B.2. In-line fuse holder is to hold midget and Class CC fuse. B.3. In-line fuse holder is to meet UL94 V-0 for flammability rating and UL 4248 Standard for Safety. B.4. In-line fuse holder is to meet IP67 touch-safe standards with watertight o-ring seal. B.5. In-line fuse holder should be rated for 600VAC/VDC and up to 30A operation. B.6. In-line fuse holder terminal type is to be copper set-screw, no crimp. B.7. The fuse is to be rated @ 5A, 600Vac/500Vd, fast-acting, high-interrupting capacity, and current-limiting. The interrupting ratings is to be AC:100kA, DC:50kA. B.8. The fuse is to be used in midget class fuse holder, it shall be UL248-14 Listed, CSA Certified, and RoHS Compliant. B.9. The maximum dimension of the in-line fuse holder is shown below.
