Specifications include, but are not limited to: 1. Make and Model 2024 or 2025 Type C 77 passenger capacity 2. Engine Cummins Diesel engine, front engine 260 hp minimum, 660 ft lbs torque minimum (Dealer to specify) A. Air cleaner Heavy duty; replaceable cartridge type B. Cooling system Heavy duty radiator – Betaweld Radiator. Provide automatic clutch-type fan C. Block heater Provide 110 volt block heater to aid in cold weather starting. D. Charging system Shall be 12 volt of not less than 270 amps and provide at least 50% of the rated charge at engine idle. Mounting should be heavy duty 2 leg type as specified in SAE-J-180. E. Batteries Three (3) 12 volt low maintenance F. Engine accessibility Shall be accessible to mechanics for ease of service with thermal and acoustic insulation G. Engine Pre-Heater 40,000 BTU; prefer Webasto Pro 90 brand or equivalent (Dealer to specify) H. Exhaust brake Provide exhaust brake 3. Transmission Automatic MD3000 Allison 4. Axle A. Front axle Heavy duty “I” beam type with 45 degree turning angle 12,000 lb. Minimum. Equipped with oil bath front hubs. Equipped with power steering. Please state turning radius. B. Rear Axle 17,000 lb. Minimum single speed lowest ratio that would allow maximum speed of 65 mph.
