Specifications include, but are not limited to: 1. Warning Lighting and Siren Package 1.1. Chassis Integrity Dual Color plus White Light Bar with Alley and Full Bar White scene lighting, diagram containing color choices for the LED’s contained in the light bar (lighting will match Current NCC*EMS fleet). The light bar will also contain an opticom compatible with Delaware’s opticom system and it will be capable of full bar steady burn (flood light) in White lighting. Pathfinder Siren/Light Controller with integrated Dual Tone capability, Horn Ring Transfer, Park Kill, PA, OBDII Vehicle Integration (when available), Programmable Inputs and Outputs I/O Expansion Module (10) MicroPulse Ultra 122U and 62U LED lights CN Signal Master 8 Lamp with 6 Lamp Traffic Directional Control, X, X End Warning lamps (lighting diagram will match current EMS fleet) Head unit to be placed in center console of vehicle with location determined by NCCEMS. Siren to be connected to the vehicle horn so that the operator can utilize siren functions without removing hands from steering wheel. Activation will allow for continuous function until depressed de-activating the siren. The siren will produce no less than 200 Watts of power through two speakers. 100-Watt Speaker ES100-C 2 Rumbler Secondary Siren Rumber-3 1 Federal Signal Headlight Flasher (If compatible with Chassis) Dome Light, 3" LED Dual color Red/White with 3 position switch mounted to overhead console. Whelen 6 Lamp TRIO Tracer LED Light Array RED/BLUE/WHITE TCRHT6 2 Mounted on running board and Wired for operation with warning lights and flash in a random red/white/blue pattern during responses as well as reduced intensity white steady burn with opening of cab doors. 5.2 Cap lighting Part number Qty MicroPulse 12 Ultra Dual Color MPS1220U-RW /BW 4 2 lights to be mounted on driver side and 2 lights to be mounted on passenger side of cap. One light will be mounted forward of the lift up door and one light will be mounted to the rear of the lift up door. These lights will flash in a blue/red color pattern with Micropulse 12 lights placed above wheel well and will also act as scene lighting. (2) RW front and (2) BW rear MicroPulse 12 Ultra TRI Color MPS1200U-RAW-BAW 4 These lights will be mounted on each side of the upper section of the rear of the Cap and mid Cap and will flash in a red/amber and blue/amber in X pattern, with capability of providing scene lighting in white. MicroPulse 6 Ultra Dual Color MPS620U-BAW 2 One light to be mounted under each rear door towards the outer section of vehicle and alternate in a Blue/Yellow – Red/Yellow pattern. The pattern will be timed out with the MicroPulse 12 lights and will be a diagonal pattern of red/yellow and blue/yellow.
