Specifications include, but are not limited to: 1. Chassis 1.1. Ford F-350 4x4 XLT Crew Cab and 6-3/4foot bed with a 159.8- inch wheelbase. Vehicle to be provided by New Castle County. 2. Body 2.1. Fiberglass style SpaceKap™ cap insert to fit a Ford F350. The cap will be white in color to match the chassis color. The cap will have fold up doors on the passenger and driver side above the bed rail that will have the ability to be opened from the street level. Each of these doors will have strut assist for ease of opening and closing. The rear doors of the cap insert will have two (2) doors with 60/40 configuration, and open independently of each other. The door design will allow for full usable space within the cap insert from bed floor to top of cap. All doors will be equipped with smooth opening paddle door handles. 2.2. All cabinet areas and open cap area will have adequate lighting on each door and inside of unit to illuminate all areas when the doors are open. All cabinet doors will have the ability to be electronically locked and unlocked from the vehicle OEM key fob and from a switch located on the cab console. 3. Drivers and Passengers Side Compartments 3.1. ALL fabrications to be installed will be finished in white Powder Coated. 3.2. Passenger Side Cabinet: will have a half side compartment toward the rear of the cap measuring 21” high x 34” x 9” deep. 3.3. Driver Side Cabinet: will have a half side compartment toward the rear of the cap measuring 21” high x 34” wide x 15” deep. 3.4. Each side cabinet will have a single level angled tray, mounted in a fashion that will allow the tray to roll out and down for ease of access. Each tray will have a strut assist (33.5” w x 35” d with 3” front lip and x 2” side and rear lip). 3.5. Turtle tile (red) will be installed in all trays and on all shelf surfaces (not including interior drawers). 4. Rear Compartment Area 4.1. One (1) Rear facing mid-level tray, (between the 2 half side compartments as listed above) mounted in a fashion that will allow the tray to roll out and down for ease of access (each tray will have strut assist). Ventilation holes will be included in floor of tray for air flow. 4.2. Two (2) Half width 6.5’ slide out manual trays, with adjustable dividers – Tray will be 78” long x 24” wide includes. Trays will have the capability of holding no less than 750 pounds and will have a smooth and easy operation regardless of angle/grade of vehicle. 4.3. Turtle tile in all trays and shelf surfaces red in color (not including interior drawers) 4.4. Inner rear door combination scene/amber warning lights, gull wing warning lights and pull-down straps. 4.5. Rear inner door flashing light and white Cut-out switches. 4.6. One (1) Additional Luma Bar LED interior light 30” high output.
