Specifications include, but are not limited to: II. MATERIAL AND EQUIPMENT SPECIFICATIONS Hot applied polymer modified crack sealant: The hot pour liquid crack sealant shall contain 5.0% +/- 1/2% polyester fibers by weight of asphalt components (recycled fibers are not permitted). Hot applied polymer modified crack sealant shall meet ASTM D5167 as follows: Fiber Properties Type Polyester Denier 3 to 5 Specific Gravity 1.38 Min. Melt Temp. 475 F Tensile Strength 78,000 to 88,000 PSI Elongation at Break 35 to 38% Modified Sealant Material Properties Cone Penetration, 77 F(ASTM D5329) 30 mm Max. Safe Heating Temp. 400 F Flexibility, 1", 90 bend, 10 sec. Pass @ 0 F Ductility, 77 F 10 cm min. Softening Point 200 F Asphalt Compatibility (ASTM D5329) Pass
