Specifications include, but are not limited to: utilize ERATE Category II funding to upgrade the network cabling in one section of Dickinson High School. The vendor will install approximately one hundred thirty (130) yellow CAT6 data lines and thirty-two (32) green CAT6a data lines to the existing access points and the necessary patch panels required. The vendor will also need to provide a quantity of thirty-two (32) ten foot white CAT6a patch cables (non-booted) to connect the existing classroom access points to the new CAT6a drop. This project will also include removal of the classroom's existing drops, which include data, voice, coax, and fiber. Patch cables for the patch panels will NOT need to be provided by the vendor. Attending a walk-through is required for this project. The vendor is responsible for the installation, termination, testing, and documentation. Each cable must be labeled as per the Red Clay Technology Dept. instructions. Cabling test results must be submitted to the Red Clay Technology Dept before submitting the invoice for the project.
