Specifications include, but are not limited to: Minimum 8 smooth walled hopper bottom bins with a minimum of 2,500 working CU FT per bin equipped with proper hopper angles for holding of feed products including but not limited to; corn, soybean meal, soy hulls, canola meal, sunflower meal, oats, field peas, soy protein isolate, wheat middlings, or other bulk feed ingredients. The bins will NOT be used to store higher density minerals such as limestone, mono-cal, or salt. Bins should be equipped with lower clean out/poke style holes for product clearing. Must meet OSHA and local building codes Installation of proper micro switch sensors as needed. New conveyance equipment to fill the bins and discharge back into the building Quoted as painted steel housing with galvanized lids/covers Optional to be fully galvanized conveyance equipment Installation of proper micro switch sensors as needed. Removal of 4 existing 12’ diameter, 2,500 cubic foot volume bins Bins will be empty at time of removal Removal of catwalk and current distribution pipes and 9” round bottom distribution drag conveyor. Concrete Evaluation of existing pad for reuse or replacement Must meet local and state codes Removal (if needed) and additional concrete (if needed) There was a septic system originally that field drained near mill Factor in soil test sampling to ensure concrete pad is place on adequate soil foundation. Electrical Disconnection of existing electrical for removal of existing bins and conveyance equipment. Connection of all new motors, micro switches (bin sensors, conveyance position sensors) Including new full runs from MCC room to the additional bins Integration into existing Interstates Controls/Rockwell Automation system.
